Sensor de temperatura Albrecht Jung FFNTC 1 NTC 10k — sensor de temperatura ambiente

Albrecht Jung FFNTC 1 is a compact temperature sensor with an NTC 10k sensing element designed to measure room temperature and provide reliable ambient feedback for HVAC controllers and building automation. The probe is intended for indoor use where accurate detection of air temperature is required to control heating, ventilation or air conditioning systems. Its small form factor allows integration into thermostat housings or control enclosures that accept a dedicated NTC 10k input.

Advantages

The FFNTC 1 delivers stable temperature readings using an NTC 10k element that is widely supported by thermostats and building controllers. Its compact design enables simple installation in confined spaces and near control electronics. The sensor offers consistent performance for room-temperature ranges typical in residential and commercial environments and facilitates precise climate regulation when connected to compatible control devices.

Key specifications

How to use

Install the FFNTC 1 in a location representative of the room’s ambient air, avoiding direct sunlight, drafts, or heat sources that can skew readings. Connect the sensor leads to the thermostat or controller input designed for an NTC 10k probe, following the equipment manufacturer’s wiring diagram and safety instructions. After connection, allow several minutes for the sensor to stabilize before calibrating or using the control system for precise regulation.

Recommendations for use

For optimal accuracy, place the sensor at typical occupancy height and in a location with good air circulation but away from windows, vents, and direct radiators. Confirm compatibility of the NTC 10k characteristic with the control device and, if required, perform a reference temperature check during commissioning.