SSD M.2 NVMe ADATA AGAMMIXS70B-8000G-CS 8 TB PCIe Gen4x4, Innogrit IG5236, 3D NAND, até 7400/6800 MB/s

The ADATA AGAMMIXS70B-8000G-CS is an 8TB M.2 NVMe internal SSD using the PCIe 4.0 interface. Designed for high-performance PCs and laptops, it delivers very high sequential transfer rates (up to 7300 MB/s read and 6300 MB/s write according to product data) and uses 3D NAND for durability. The M.2 2280 form factor makes it suitable for compact and thin devices while remaining backward compatible with PCIe 3.0.

Advantages

The drive offers PCIe Gen4 performance with high sequential read and write speeds, a low-profile M.2 2280 form factor for space-constrained systems, and an aluminum heatsink that reduces operating temperatures. It supports Dynamic SLC caching and a DRAM cache buffer for sustained performance and uses LDPC error-correcting code, End-to-End data protection, RAID engine support and AES-256 encryption to help maintain data integrity and security.

Suitable for

• High-performance gaming PCs and laptops
• Video editing and 3D rendering workstations
• Content creation and large file storage
• Upgrading thin and compact systems that accept M.2 2280

Key specifications

• Model: ADATA AGAMMIXS70B-8000G-CS
• Capacity: 8000 GB (8 TB)
• Interface: PCIe 4.0 NVMe (backward compatible with PCIe 3.0)
• Form factor: M.2 2280
• Sequential read speed: up to 7300 MB/s (manufacturer data)
• Sequential write speed: up to 6300 MB/s (manufacturer data)
• Weight: 0.01 kg

How to use

Power down your computer and disconnect it from the mains. Open the chassis or access panel, locate the M.2 slot compatible with PCIe NVMe drives, and install the M.2 2280 SSD into the slot at an angle, then secure it with the mounting screw. Reassemble the system, power it on, and initialize, partition and format the drive in your operating system if required. For laptops, follow the manufacturer’s service manual for safe installation procedures.

Recommendations

For best performance, use a PCIe 4.0 compatible motherboard or laptop and enable any relevant BIOS/UEFI settings for NVMe drives. Ensure adequate airflow around the M.2 slot to benefit from the included heatsink and keep firmware up to date using ADATA's official tools.