Suporte/base de TV VALUE 17.99.1186 para 43,2 cm a 94 cm (17 polegadas – 37 polegadas), VESA 75×75–200×200, inclinável 0–90°, orientável ±45°, 20 kg, preto

VALUE 17.99.1186 is a ceiling/stand TV mount designed for flat-panel screens from 43.2 cm (17") up to 94 cm (37"). The bracket accommodates VESA mounting patterns from 75×75 mm to 200×200 mm and supports a maximum load of 20 kg. The mount provides tilt adjustment from 0° to 90° and swivel of ±45°, enabling flexible positioning for different installation angles and viewing needs. The unit is finished in black and constructed for compact, space-saving installations on ceilings or short stands.

Advantages

The mount combines a broad VESA compatibility range with a 20 kg load capacity, allowing it to fit a wide selection of small and medium-sized TVs and monitors. Its tilt range up to 90° and ±45° swivel permit adaptable viewing angles on sloped or flat ceiling installations. The black metal finish offers a discrete appearance suitable for both home and office environments, while a compact footprint minimizes visual clutter.

Suitable for

• Mounting 17"–37" (43.2–94 cm) TVs or monitors on ceilings or low stands
• Installations where adjustable tilt and swivel are required for improved viewing
• Rooms with sloped ceilings or limited wall space
• Office, meeting room, reception area, or home use with compact screens

Key specifications

• Screen size compatibility: 43.2 cm (17") to 94 cm (37")
• VESA compatibility: 75×75 mm up to 200×200 mm
• Maximum load capacity: 20 kg
• Tilt adjustment range: 0° to 90°
• Swivel range: ±45°
• Finish and material: black metal
• Supports a single display

How to use

Verify that the screen falls within the supported size and weight limits and that the VESA mounting holes match the bracket. Secure the bracket to a suitable ceiling structure using appropriate fasteners for the building material; ensure the ceiling fixings are rated for the load. Attach the TV to the mounting plate following the alignment of VESA holes and tighten the mounting screws. Adjust the tilt between 0° and 90° and swivel up to ±45° to achieve the desired viewing angle, and confirm all fasteners are tightened before leaving the installation in use.

Recommendations

For safe and durable installation, use fasteners and anchors suitable for the ceiling material and verify load-bearing capacity. If mounting on sloped ceilings, test tilt and swivel adjustments to avoid cable strain and ensure clear line-of-sight. Periodically check mounting screws and connections for tightness, especially after adjusting the bracket or moving the display.