Conta Contactos
O seu carrinho
Envio por DPD e FedEx
Precisa de ajuda? Pergunte à IA

Transceptor QSFP BlueOptics QSFP-40G-SR4-QU-BO 40000 Mbit/s

Transceptor QSFP BlueOptics QSFP-40G-SR4-QU-BO 40000 Mbit/s
Transceptor QSFP BlueOptics QSFP-40G-SR4-QU-BO 40000 Mbit/s
Transceptor QSFP BlueOptics QSFP-40G-SR4-QU-BO 40000 Mbit/s
Transceptor QSFP BlueOptics QSFP-40G-SR4-QU-BO 40000 Mbit/s
Transceptor QSFP BlueOptics QSFP-40G-SR4-QU-BO 40000 Mbit/s
Transceptor QSFP BlueOptics QSFP-40G-SR4-QU-BO 40000 Mbit/s
Transceptor QSFP BlueOptics QSFP-40G-SR4-QU-BO 40000 Mbit/s
Transceptor QSFP BlueOptics QSFP-40G-SR4-QU-BO 40000 Mbit/s
97,39 €
The BlueOptics QSFP-40G-SR4-QU-BO is a QSFP fiber optic transceiver module engineered for 40 Gbit/s data links over multimode fibre. It uses an MPO/MTP connector and supports 40GBASE-SR4 short-range optical transmission up to 150 m on appropriate multimode fibre. The module has a compact QSFP form f... Ler mais
Stock 90 Código 1477873 Marca BLUEOPTICS Modelo QSFP-40G-SR4-QU-BO Garantia 2 anos

Envios e devoluções

Entrega prevista Quinta-feira, Outubro 22
Receberá atualizações através do nosso sistema de seguimento detalhado
Opções de pagamento
Cartão bancárioVisaMastercardPayPalApple PayGoogle PayTransferência bancária

The BlueOptics QSFP-40G-SR4-QU-BO is a QSFP fiber optic transceiver module engineered for 40 Gbit/s data links over multimode fibre. It uses an MPO/MTP connector and supports 40GBASE-SR4 short-range optical transmission up to 150 m on appropriate multimode fibre. The module has a compact QSFP form factor, a silver housing, weighs approximately 0.02 kg and is intended for use in data center switches, routers and other network devices that accept QSFP 40GBASE-SR4 optics.

Advantages

This transceiver follows MSA QSFP specifications and provides simultaneous transmit and receive capability on parallel multimode fibre using 850 nm optics. Built to be compatible with major hardware platforms that support 40GBASE-SR4 QSFP modules, it offers digital diagnostics support for real-time monitoring of supply voltage, laser bias current, transmit power, receive power and temperature where the host supports DDM/DOM. The small, lightweight metal housing simplifies installation and passive cooling in dense rack environments.

Suitable for

Key specifications

How to use

Install the QSFP transceiver into a compatible QSFP slot on the host device according to the vendor's hot-plug and electrostatic discharge (ESD) procedures. Ensure the device firmware or drivers support third-party QSFP optics and enable DDM/DOM in the host if you require digital diagnostic data. Connect an appropriate MPO/MTP multimode patch cord or harness, observing correct polarity and fibre type (OM3/OM4) to achieve the stated distances. After insertion and connection, verify link status on the host and confirm optical power and diagnostics through the management interface if available.

Recommendations

Use OM3 or OM4 multimode fibre for reliable 40GBASE-SR4 performance up to 150 m, and maintain clean MPO/MTP connector endfaces to avoid signal loss. Confirm host compatibility and, where possible, test the transceiver in your specific hardware and firmware configuration prior to production deployment.

Destaques principais
  • 40 Gbit/s short-reach server-to-switch or switch-to-switch links within data centers
  • High-bandwidth aggregation and spine-leaf network fabrics
  • Storage area network interconnects and Fibre Channel over Ethernet (FCoE) at 40G
  • Test setups and lab environments requiring MPO/MTP multimode connections
  • Maximum data transfer rate: 40000 Mbit/s
  • Optical standard: 40GBASE-SR4 (multimode)
  • Maximum transfer distance: 150 m (on suitable multimode fibre)
  • Wavelength: 850 nm transmit and receive (multimode)
  • Connector type: MTP/MPO
  • Form factor: QSFP (Quad Small Form-factor Pluggable)
  • Housing colour: Silver
  • Weight: 0.02 kg
Especificações
Certificados de sustentabilidade
CE, RoHS, Federal Communications Commission (FCC)
Comprimento de onda Rx (máx.)
850 nm
Comprimento de onda Rx (mín.)
850 nm
Comprimento de onda Tx (máx.)
850 nm
Comprimento de onda Tx (mín.)
850 nm
Conector de fibra ótica
MTP/MPO
Cor do produto
Silver
Distância máxima de transmissão
150 m
Fibra multimodo (MMF) suportada
Yes
Formato
QSFP
Manual
Yes
Número de produtos incluídos
1 pc(s)
Peso
0.02 kg
Peso da embalagem
30 g
Taxa máxima de transferência de dados
40000 Mbit/s
Tecnologia de cablagem Ethernet de fibra
40GBASE
Temperatura de funcionamento (T-T)
0 - 70
Tipo de interface
QSFP
Tipo de transceiver SFP
Fiber optic

Folheto

Abrir documento

Documento

Abrir documento
Histórico de preços nos últimos 6 meses
Transceptor QSFP BlueOptics QSFP-40G-SR4-QU-BO 40000 Mbit/s
Atual
97,39 €
Mais baixo
96,39 €
Mais alto
101,57 €
Variação 24 h
+0,26 €   +0%
Semana
+0,06 €   +0%
Mês
+0,49 €   +1%

Produtos populares nesta categoria

Olá, sou o assistente de IA da DistriNode. Posso ajudá-lo a encontrar produtos, comparar opções, criar orçamentos em PDF ou abrir pedidos de suporte.