Conta Contactos
O seu carrinho
Envio por DPD e FedEx
Precisa de ajuda? Pergunte à IA

Transceptor SFP BlueOptics JF833A-BO 155 Mbit/s 1310 nm

Transceptor SFP BlueOptics JF833A-BO 155 Mbit/s 1310 nm
Transceptor SFP BlueOptics JF833A-BO 155 Mbit/s 1310 nm
Transceptor SFP BlueOptics JF833A-BO 155 Mbit/s 1310 nm
Transceptor SFP BlueOptics JF833A-BO 155 Mbit/s 1310 nm
Transceptor SFP BlueOptics JF833A-BO 155 Mbit/s 1310 nm
Transceptor SFP BlueOptics JF833A-BO 155 Mbit/s 1310 nm
Transceptor SFP BlueOptics JF833A-BO 155 Mbit/s 1310 nm
Transceptor SFP BlueOptics JF833A-BO 155 Mbit/s 1310 nm
Transceptor SFP BlueOptics JF833A-BO 155 Mbit/s 1310 nm
Transceptor SFP BlueOptics JF833A-BO 155 Mbit/s 1310 nm
50,14 €
The BlueOptics JF833A-BO 155 Mbit/s 1310 nm SFP transceiver is a compact fiber optic module designed for serial data links in telecom and networking equipment. It supports a maximum data transfer rate of 155 Mbit/s over single-mode fiber at a transmission wavelength of 1310 nm and is powered by a st... Ler mais
Stock 259 Código 1474866 Marca BLUEOPTICS Modelo JF833A-BO Garantia 2 anos

Envios e devoluções

Entrega prevista Sexta-feira, Outubro 23
Receberá atualizações através do nosso sistema de seguimento detalhado
Opções de pagamento
Cartão bancárioVisaMastercardPayPalApple PayGoogle PayTransferência bancária

The BlueOptics JF833A-BO 155 Mbit/s 1310 nm SFP transceiver is a compact fiber optic module designed for serial data links in telecom and networking equipment. It supports a maximum data transfer rate of 155 Mbit/s over single-mode fiber at a transmission wavelength of 1310 nm and is powered by a standard 3.3 V input. With a lightweight metal housing finished in silver and an SFP form factor, this transceiver is intended for straightforward integration into SFP-compatible switches, routers and media converters to extend fiber connections up to 2000 m.

Advantages

The module offers stable low-speed optical transmission suitable for legacy and specific synchronous networks. Its SFP form factor ensures hot-pluggability and compatibility with a wide range of networking devices that accept SFP modules. Low weight and compact dimensions reduce rack and port stress while the 1310 nm wavelength provides reliable single-mode performance over extended distances.

Suitable for

Key specifications

How to use

Insert the BlueOptics SFP transceiver into an available SFP slot on a compatible network device while the device is powered on if hot-swap support is provided, or follow the host device’s procedure for insertion with power off if required. Connect the single-mode fiber cable to the transceiver’s optical interface, ensuring correct connector type and clean end-faces. Configure the host device interface to operate at the appropriate data rate and protocol for 155 Mbit/s links. Verify link status indicators on the host device and confirm end-to-end connectivity with appropriate network tests.

Recommendations

Use clean, undamaged single-mode fiber with connectors matching the transceiver; avoid bending the fiber beyond recommended radii and ensure connectors are inspected or cleaned before mating. For stable operation, operate the module within the host device’s specified temperature and power ranges and follow equipment vendor guidance for firmware and compatibility lists.

Destaques principais
  • Extending single-mode fiber links up to 2000 m
  • Replacement or upgrade of existing SFP ports in switches and routers
  • Point-to-point serial data transmission at 155 Mbit/s
  • Integration into media converters for fiber-to-copper transitions
  • Maximum data transfer rate: 155 Mbit/s
  • Wavelength: 1310 nm
  • Maximum transfer distance: 2000 m (single-mode)
  • Power supply: 3.3 V input
  • Form factor: SFP (hot-pluggable)
  • Weight: 0.02 kg
  • Housing colour: Silver
Especificações
Comprimento de onda
1310 nm
Comprimento de onda Rx (máx.)
1310 nm
Comprimento de onda Tx (máx.)
1310 nm
Conector de fibra ótica
SFP
Cor do produto
Silver
Distância máxima de transmissão
2000 m
Norma do transceiver SFP
FX
Peso
0.02 kg
Peso da embalagem
30 g
Quantidade por embalagem
1 pc(s)
Taxa máxima de transferência de dados
155 Mbit/s
Tecnologia de cablagem Ethernet de fibra
100BASE
Temperatura de armazenamento (T-T)
0 - 95
Temperatura de funcionamento (T-T)
0 - 70
Temperatura máxima de funcionamento
70 °C
Temperatura mínima de funcionamento
0 °C
Tensão de entrada
3.3
Tipo de interface
SFP
Tipo de transceiver SFP
Fiber optic
Histórico de preços nos últimos 6 meses
Transceptor SFP BlueOptics JF833A-BO 155 Mbit/s 1310 nm
Atual
50,14 €
Mais baixo
49,39 €
Mais alto
58,86 €
Variação 24 h
+0,62 €   +1%
Semana
+0,72 €   +1%
Mês
-5,85 €   -10%

Produtos populares nesta categoria

Olá, sou o assistente de IA da DistriNode. Posso ajudá-lo a encontrar produtos, comparar opções, criar orçamentos em PDF ou abrir pedidos de suporte.