Transceptor SFP BlueOptics RDH10247/25-BO fibra ótica 1250 Mbit/s LC

The BlueOptics RDH10247/25-BO is an SFP transceiver module for single-mode fibre links offering a maximum data transfer rate of 1250 Mbit/s. Equipped with an LC duplex interface and a compact silver housing weighing 20 g, this SFP conforms to CE, RoHS and FCC standards. It implements 1000BASE-LX operation with 1310 nm optical transmitter and receiver elements and is compatible with systems that support standard MSA-compliant 1000BASE-LX SFP modules.

Advantages

This transceiver supports Ethernet and Fibre Channel over Ethernet or SDH/SONET protocols up to 1.25 Gbit/s and is designed for distances up to 10 km on single-mode fibre. Manufactured to MSA standards and populated with industry-grade components, it provides reliable signal transmission, long operational lifetime and stable optical performance. The LC duplex connector enables simultaneous transmit and receive channels on separate fibres, while compliance with common regulatory standards simplifies integration into professional network equipment.

Suitable for

Key specifications

How to use

Install the BlueOptics RDH10247/25-BO into a compatible SFP slot on your network device while the device is powered down or following hot-swap procedures recommended by the equipment vendor. Connect LC duplex patch cords to the module’s duplex LC connector—observe correct TX/RX orientation so the transmit fibre of one end connects to the receive fibre of the other. Configure the host device port for 1000BASE-LX operation if required by the operating system or switch firmware. If the host supports Digital Diagnostics Monitoring (DDM/DOM), enable or query the monitoring interface to read real-time parameters such as optical power and temperature.

Recommendations

Use single-mode LC patch cords and verify link budget and fibre attenuation for distances approaching 10 km. Confirm that the target hardware supports DDM/DOM if you plan to use digital diagnostics. Follow manufacturer guidelines for ESD protection and handling of SFP modules during installation to avoid damage and ensure reliable operation.