Transceptor SFP BlueOptics SP-FE-FX-CDFM-BO 155 Mbit/s 1310 nm

The BlueOptics SP-FE-FX-CDFM-BO 155 Mbit/s 1310 nm is a compact SFP fiber optic transceiver designed for single-mode connections. Housed in a durable metal casing with a silver finish, this module supports a maximum data transfer rate of 155 Mbit/s and operates at a wavelength of 1310 nm. It is lightweight at approximately 2 g and requires a 3.3 V supply, making it suitable for integration into compatible network switches, media converters and routers that accept SFP form-factor modules.

Advantages

This SFP transceiver offers a reliable optical link with predictable performance at 155 Mbit/s and a standard 1310 nm wavelength. The metal housing provides mechanical protection and EMI shielding while the small SFP form factor keeps port density high. Low weight and standard 3.3 V operation simplify installation and compatibility with a wide range of networking equipment.

Suitable for

• Single-mode fiber uplinks and short- to medium-range fiber connections
• Switch and router SFP ports requiring 1310 nm optics
• Media converters and fiber extenders operating at 155 Mbit/s
• Network installations where compact, low-weight transceivers are preferred

Key specifications

• Form factor: SFP (small form-factor pluggable)
• Maximum data transfer rate: 155 Mbit/s
• Operating wavelength: 1310 nm
• Power supply: 3.3 V
• Housing: metal, silver colour
• Weight: approximately 0.002 kg

How to use

Insert the BlueOptics SFP transceiver into a compatible SFP slot on your switch, router or media converter until it clicks into place. Connect the single-mode fiber cable to the optical port, ensuring proper polarity and clean fiber endfaces. Power up the host device; the transceiver will draw 3.3 V from the SFP slot and negotiate the link at up to 155 Mbit/s. Monitor link status via the host device to confirm a stable optical connection.

Recommendations

Ensure fiber connectors are clean and properly aligned before insertion. Verify that the host device supports 1310 nm SFP modules and the target link speed of 155 Mbit/s. Use short, controlled insertion and removal motions to avoid damaging the SFP slot or module. Store unused modules in protective packaging to prevent contamination and mechanical damage.