Conta Contactos
O seu carrinho
Envio por DPD e FedEx
Precisa de ajuda? Pergunte à IA

Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s

Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
66,54 €
The BlueOptics TOM-10G-SFPP-SR1-BO is an SFP+ fiber optic transceiver designed for 10 Gbit/s network links. Housed in a metal enclosure and weighing approximately 20 g, this module follows MSA-compliant SFP+ form-factor standards and is intended for use in systems that accept SFP+ optics. The transc... Ler mais
Stock 2872 Código 1485798 Marca BLUEOPTICS Modelo TOM-10G-SFPP-SR1-BO Garantia 2 anos

Envios e devoluções

Entrega prevista Sexta-feira, Outubro 23
Receberá atualizações através do nosso sistema de seguimento detalhado
Opções de pagamento
Cartão bancárioVisaMastercardPayPalApple PayGoogle PayTransferência bancária

The BlueOptics TOM-10G-SFPP-SR1-BO is an SFP+ fiber optic transceiver designed for 10 Gbit/s network links. Housed in a metal enclosure and weighing approximately 20 g, this module follows MSA-compliant SFP+ form-factor standards and is intended for use in systems that accept SFP+ optics. The transceiver supports high-speed optical transmission over appropriate fiber types and is specified with a long mean time between failures (MTBF) to support continuous operation in network equipment.

Advantages

This SFP+ transceiver delivers 10 Gbit/s data transfer capacity in a compact, silver metal housing and is compatible with standard SFP+ interfaces. Its MSA-conformant design ensures mechanical and electrical interoperability with a wide range of network switches, routers and storage systems that accept SFP+ modules. The unit’s high MTBF provides a measure of long-term reliability for installations that require extended uptime.

Suitable for

Key specifications

How to use

Install the transceiver into an available SFP+ port on compatible network equipment until it latches. Connect the appropriate LC fiber patch cable (single-mode or multimode as required by the link and device support) to the module’s optical interface, observing correct transmit/receive orientation. Configure the host device for a 10 Gbit/s link and verify link status and diagnostics through the system management interface. Power down the host device only if required by the vendor; otherwise hot-plug insertion and removal are supported by SFP+ ports that allow hot-swap operation.

Recommendations

Ensure the transceiver is used in equipment that supports SFP+ modules and the intended optical wavelength and fiber type. Use quality LC duplex patch cords and follow manufacturer guidelines for connector cleaning and handling to maintain link performance. If digital diagnostic monitoring (DDM/DOM) is required, confirm that the host hardware provides DDM support to access real-time module parameters.
Destaques principais
  • 10 Gbit/s Ethernet uplinks and aggregation links
  • Fibre Channel over Ethernet and high-speed storage networking
  • Short- to mid-range optical connections in data centers and telecom closets (use appropriate fiber type)
  • Replacement or spare SFP+ module inventory in network hardware supporting SFP+ optics
  • Interface type: SFP+
  • Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
  • Housing material and colour: metal, silver
  • Weight: 0.02 kg (approx. 20 g)
  • Reliability indicator: MTBF approximately 1,000,000 hours
Especificações
Comprimento de onda Rx (máx.)
1310 nm
Comprimento de onda Tx (máx.)
1310 nm
Conector de fibra ótica
LC
Cor do produto
Silver
Distância máxima de transmissão
10000 m
Ethernet LAN
Yes
Fibra monomodo (SMF) suportada
Yes
Material da carcaça
Metal
Norma do transceiver SFP
LR
Peso
0.02 kg
Peso da embalagem
30 g
Taxa máxima de transferência de dados
10000 Mbit/s
Tecnologia de cablagem Ethernet de fibra
10GBASE
Temperatura de funcionamento (T-T)
0 - 70
Temperatura máxima de funcionamento
70 °C
Temperatura mínima de funcionamento
0 °C
Tempo médio entre falhas (MTBF)
1000000 h
Tipo de interface
SFP+
Tipo de interface Ethernet
10 Gigabit Ethernet
Tipo de transceiver SFP
Fiber optic
Histórico de preços nos últimos 6 meses
Transceptor SFP BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Atual
66,54 €
Mais baixo
65,79 €
Mais alto
71,11 €
Variação 24 h
+0,59 €   +1%
Semana
+0,72 €   +1%
Mês
-1,90 €   -3%

Produtos populares nesta categoria

Olá, sou o assistente de IA da DistriNode. Posso ajudá-lo a encontrar produtos, comparar opções, criar orçamentos em PDF ou abrir pedidos de suporte.