UPS Eaton 5SC 5SC1000i/ 1000VA Torre

The Eaton 5SC1000i is a line-interactive uninterruptible power supply (UPS) with 1 kVA (700 W) output capacity designed for small business servers and sensitive IT equipment. The tower-style UPS includes an LCD interface for real-time status and measurements, delivers sine wave output for compatibility with modern electronics, and provides eight C13 AC outlets. Typical runtime is approximately 5 minutes at full load and 13 minutes at half load. The unit is CE/GS/C-Tick certified and comes in a black finish.

Advantages

The Eaton 5SC1000i offers reliable, line-interactive power protection with sine wave output to ensure compatibility with sensitive devices. Its LCD display supplies clear, real-time information on status and measurements. With eight AC outlets and a compact tower form factor, the UPS supports multiple devices while occupying minimal floor space. Certifications (CE/GS/C-Tick) indicate compliance with applicable safety and EMC standards.

Suitable for

• Small business servers and network equipment
• Workstations and office computers requiring clean sine wave power
• Network closets and edge IT installations with limited space

Key specifications

• Model: Eaton 5SC1000i
• Output power capacity: 1 kVA
• Output power: 700 W
• AC outlets: 8 × C13
• USB: 1 × USB 2.0 port
• Form factor: Tower
• Display: LCD (real-time status and measurements)
• Typical runtime: ~5 min at full load, ~13 min at half load
• Certifications: CE, GS, C-Tick
• Weight: 11.1 kg
• Colour: Black

How to use

Place the Eaton 5SC1000i on a stable, level surface in a well-ventilated location. Connect critical devices to the UPS AC outlets (C13) and plug the UPS into a grounded mains socket. Use the LCD to monitor input/output measurements and battery status. For communication and orderly shutdown, connect the UPS to a computer via the USB 2.0 port and install Eaton management software if required. Test the UPS after installation to verify correct operation and battery condition.

Recommendations

For reliable operation, avoid connecting high inrush devices (such as laser printers) to the protected outlets. Periodically test the battery and replace it according to Eaton's maintenance schedule; ensure the UPS has adequate ventilation and is not installed in extremely hot or humid conditions.