Aspirador robô TP-Link Tapo RV50 Pro Omni — depósito de pó 0,28 L, bateria 5200 mAh, estação base com depósito de pó 3 L

TP-Link Tapo RV50 Pro Omni is a round robot vacuum designed for combined vacuuming and wet mopping with automated maintenance. It features a 0.28 L dust container in the robot and a 3 L dust tank in the included base station, plus a 5200 mAh rechargeable battery for extended run times. Compact at Ø 35 cm and 100.3 mm high, the robot is intended for apartments and medium-sized rooms. The base station performs dust disposal, mop washing with hot water, warm air drying and charging to reduce manual maintenance.

Advantages

The system integrates powerful suction with automated mop care to reduce user interaction: a high-suction motor achieves up to 15,000 Pa to remove embedded dirt while the combi container supports both dry debris and wet mopping. The base station washes mop pads at up to 60°C and dries them at up to 50°C, limits odor development and stores dust in a 3 L tank so you empty less frequently. Anti-tangle brushes, a tangle-free cutting brush at the base station and an anti-tangle caster reduce hair wrap and maintenance related to pet hair. Dual-laser precision avoidance improves navigation and obstacle detection for safer, more efficient cleaning paths.

Suitable for

• Daily vacuuming and wet mopping of apartments and medium rooms
• Homes with pets where hair management and anti-tangle features are required
• Hard floors such as tile, laminate and sealed wood where streak-free mopping is important
• Households that prefer low-touch maintenance via an automated base station

Key specifications

• Dust container in robot: 0.28 L; base station dust tank: 3 L
• Battery capacity: 5200 mAh (rechargeable)
• Suction force: up to 15,000 Pa
• Mop washing temperature: up to 60°C; warm air drying up to 50°C
• Dual spinning mops with 95 ml built-in water tank to maintain even moisture
• Navigation: dual-laser front and side avoidance for obstacle detection
• Anti-tangle cutting brush, anti-tangle side brush and anti-tangle caster
• Carpet detection and auto mop removal for cleaning rugs and carpets
• Filtration: HEPA filtration system
• Connectivity: Wi‑Fi for app control and customizable cleaning zones
• Robot dimensions: diameter 35 cm, height 100.3 mm

How to use

Place the base station on a level surface with clearance on both sides and plug it into an AC supply (100–240 V, 50/60 Hz). Charge the robot fully before the first use. Use the app to map the home and configure cleaning zones, pet zones and carpet areas; set suction and mopping preferences and schedule automatic runs. For wet mopping, fill the robot’s or station’s water reservoir per the user manual and allow the base station to wash and dry mop pads after cleaning cycles. Empty the base station dust tank when the app or indicator notifies you and follow manufacturer guidance for filter replacement.

Recommendations

For best results, remove small obstacles and cords from floors before starting a cleaning cycle, set pet zones and higher suction in areas with concentrated hair, and run periodic base station maintenance including emptying the 3 L dust tank and checking the mop washing and drying functions to maintain hygiene and performance.