Cabo de alimentação ACT ficha CEE 7/7 (angular) - conector fêmea C5 preto 10 m

The ACT Powercord CEE 7/7 male angled to C5 coupler is a 10 m black power cable designed to supply mains power to compatible devices. The cable supports 230 V AC and up to 2.50 A and features three conductors of 0.75 mm² with a PVC jacket for basic mechanical protection and insulation.

Advantages

This power cord provides an extended reach with its 10 m length while maintaining standard mains compatibility via the CEE 7/7 angled plug and C5 connector. The 0.75 mm² conductors are suitable for moderate current loads up to 2.5 A, and the PVC jacket offers resistance against everyday wear and handling. The angled CEE 7/7 plug helps reduce strain on the wall outlet in tight spaces.

Suitable for

• Powering laptops and notebook power supplies with a C5 inlet
• Small office equipment and network devices requiring up to 2.5 A
• Temporary power extension where 10 m cable length is needed

Key specifications

• Voltage: 230 V AC
• Current: 2.50 A
• Conductors: 3 × 0.75 mm²
• Jacket: PVC
• Connectors: CEE 7/7 male (angled) to IEC C5 coupler
• Length: 10 m
• Color: Black

How to use

Insert the angled CEE 7/7 plug into a compatible mains outlet and connect the IEC C5 coupler to the device inlet. Ensure the cable is fully unwound and positioned to avoid tripping hazards or tight bends. Do not exceed the rated current of 2.5 A and verify device compatibility with a C5 inlet before use.

Recommendations

Use the cable indoors and away from heat sources or sharp edges. Inspect the cord periodically for damage; discontinue use if the insulation is compromised. For higher current or permanent installations, select a cable with appropriate conductor size and certification.