Cabo de alimentação SATA 15 pinos para 2x SATA HDD DeLOCK 60105 0,15 m

The DeLOCK Power Cable SATA 15pin to 2x SATA HDD (0.15 m) allows powering two SATA hard drives from a single 15‑pin SATA power connector on a PC power supply. The short, compact cable features one 15‑pin SATA plug and two SATA power sockets, providing a tidy solution for adding additional drives without extra PSU connectors.

Advantages

This cable provides a simple and space‑saving way to supply power to two SATA HDDs from one SATA power port. Its short 0.15 m length reduces cable clutter inside the chassis and helps maintain neat cable routing. The cable is compatible with standard SATA power connectors and supports typical HDD power requirements.

Suitable for

• Adding a second or third SATA hard drive when PSU connectors are limited
• Small form‑factor PC builds where short cables are needed
• Temporary drive installations for data transfer or cloning

Key specifications

• Cable length: 0.15 m
• Connector 1: 15pin SATA (power)
• Connector 2: 2× SATA (power)
• Brand: DELOCK
• MPN: 60105
• Product colour: Multicolour

How to use

Turn off the PC and disconnect it from mains power before connecting the cable. Plug the 15‑pin SATA power connector into an available SATA power port on the power supply, then connect the two SATA power sockets to the hard drives. Ensure connectors are fully seated and that cables do not interfere with fans or moving parts. Reconnect mains power and power on the system to verify both drives receive power.

Recommendations

Use this splitter only when the combined power draw of the connected SATA drives does not exceed the specifications of the single PSU SATA connector. For high‑power devices or many drives, consider using dedicated PSU cables or a modular PSU cable with sufficient current rating.