Cabo de ligação breakout BlueOptics MPO–4xDuplex LC MCA7J60-C002, 2 m, Multimodo OM4 G50/125 µm, 3,0 mm LSZH, 8 fibras, MPO (sem pinos)

BlueOptics MPO–4xDuplex LC Breakout Patch Cable MCA7J60-C002 is a 2 meter multimode OM4 fiber assembly designed to convert an 8‑core MPO (unpinned) trunk into four duplex LC/UPC terminations. The cable uses G50/125µm OM4 multimode fiber with a 3.0 mm LSZH magenta jacket and is intended for high‑density cabling environments where reliable multimode performance and space saving are required. The product is supplied with a measurement protocol that documents attenuation and insertion loss for quality assurance.

Advantages

This breakout cable provides a compact and organized way to transition from MPO trunks to LC duplex ports without additional adapters. OM4 multimode fiber supports higher bandwidth and extended reach compared to lower‑grade multimode types, making it suitable for modern data center links and short‑reach aggregation layers. The LSZH jacket reduces smoke and toxic gas emission in case of fire, and the magenta color simplifies identification of OM4 circuits in mixed deployments.

Suitable for

Key specifications

How to use

Install the MPO end into the corresponding unpinned MPO adapter or MPO port of a trunk or cassette, and connect the four duplex LC/UPC connectors to the target switch, transceiver modules or patch panel ports. Ensure correct alignment and gentle insertion of connectors; avoid excessive bending or tension on the fiber cable. Use the supplied measurement protocol to verify insertion loss and link continuity after installation.

Recommendations

For reliable performance, maintain the specified minimum bend radius for multimode fiber and avoid tight loops. Use fiber cleaning tools on LC and MPO end faces before mating, and route the cable within cable managers or trays to prevent strain. Match OM4 links end‑to‑end to preserve modal bandwidth for applications such as 25G and 100G parallel optics.