Cabo de rede EFB Elektronik K8093.0,5 RJ-45 Cat5e 0,5 m verde

The EFB Elektronik K8093.0,5 is a 0.5 m Cat5e networking cable with RJ-45 connectors designed for 10/100/1000Base-T(X) Ethernet connections. The cable uses U/UTP construction with 4 pairs of AWG24/7 conductors in a PVC jacket, meets flame retardant IEC 60332-1 requirements, and follows TIA/EIA 568B wiring. The cable is green and intended for short patching and device connections in network installations.

Advantages

The moulded RJ-45 plugs with copper-plated contacts provide reliable signal transmission while the moulded strain relief reduces stress on the connector without latch protection. Unshielded U/UTP design and Cat5e specification support gigabit Ethernet performance for typical LAN environments. Compliance with IEC 60332-1 and standard TIA/EIA 568B wiring ensures compatibility and basic fire safety.

Suitable for

• Connecting computers, switches and routers over short distances (patching)
• Home and office LAN installations requiring Cat5e performance
• Temporary or permanent device-to-device connections where 0.5 m length is sufficient

Key specifications

• Length: 0.5 m
• Standard: Cat5e, 10/100/1000Base-T(X)
• Connectors: 2 × RJ-45 (IEC 60603-7)
• Cable type: U/UTP 4 × 2 × AWG24/7, PVC, Ø=5.4 mm
• Wiring: TIA/EIA 568B coded
• Flame retardant: IEC 60332-1
• Colour: Green

How to use

Plug each RJ-45 connector into the corresponding Ethernet ports on your devices (for example, computer, switch or router). Ensure connectors are fully inserted until the plug clicks into place if the port has a latch. Route the 0.5 m cable to avoid tight bends and mechanical strain; the moulded strain relief helps protect the connection point.

Recommendations

Use this short Cat5e patch cable for close-proximity connections where a 0.5 m length reduces excess cabling. Avoid routing the cable near strong electromagnetic sources for best signal integrity, and do not expose the PVC jacket to prolonged direct sunlight or high temperatures.