Conta Contactos
O seu carrinho
Envio por DPD e FedEx
Precisa de ajuda? Pergunte à IA

Cabo de rede InLine S/FTP PiMF Cat.6A sem halogéneos 500 MHz amarelo 7,5 m

Cabo de rede InLine S/FTP PiMF Cat.6A sem halogéneos 500 MHz amarelo 7,5 m
Cabo de rede InLine S/FTP PiMF Cat.6A sem halogéneos 500 MHz amarelo 7,5 m
Cabo de rede InLine S/FTP PiMF Cat.6A sem halogéneos 500 MHz amarelo 7,5 m
Cabo de rede InLine S/FTP PiMF Cat.6A sem halogéneos 500 MHz amarelo 7,5 m
13,54 €
InLine Patch Cable S/FTP PiMF Cat.6A halogen free 500MHz yellow 7.5m is a shielded Ethernet patch cable designed for professional cabling in data centers, server racks and other network installations. It meets Cat.6A specifications with a 500 MHz rating and uses S/FTP (shielded foil twisted pair wit... Ler mais
Stock 4 Código 1438713 Marca INLINE Modelo 76807Y Garantia 2 anos

Envios e devoluções

Entrega prevista Terça-feira, Outubro 20
Receberá atualizações através do nosso sistema de seguimento detalhado
Opções de pagamento
Cartão bancárioVisaMastercardPayPalApple PayGoogle PayTransferência bancária

InLine Patch Cable S/FTP PiMF Cat.6A halogen free 500MHz yellow 7.5m is a shielded Ethernet patch cable designed for professional cabling in data centers, server racks and other network installations. It meets Cat.6A specifications with a 500 MHz rating and uses S/FTP (shielded foil twisted pair with overall braid) construction for improved signal integrity. The cable is halogen-free and fitted with RJ-45 connectors for straightforward Gigabit and 10 Gigabit connections.

Advantages

The S/FTP PiMF design reduces electromagnetic interference and crosstalk, supporting reliable high-speed transmission up to Cat.6A performance. The halogen-free jacket increases safety in enclosed environments. At 7.5 m length and in a high-visibility yellow colour, the cable provides flexibility for routing and easy identification in patch panels and server racks.

Suitable for

  • Data center patching and inter-rack connections
  • Server rack cabling for Gigabit and 10 Gigabit networks
  • Structured network installations requiring Cat.6A performance
  • Environments where halogen-free materials are preferred for safety

Key specifications

  • Standard: Cat.6A
  • Shielding: S/FTP (PiMF + overall braid)
  • Frequency: 500 MHz
  • Length: 7.5 m
  • Connectors: RJ-45 to RJ-45
  • Colour: Yellow
  • Material: Halogen-free jacket

How to use

Connect one RJ-45 plug to a network switch, patch panel or server port and the other RJ-45 plug to the corresponding device or patch point. Route the cable through the rack or cable management system, avoiding sharp bends and sources of strong electromagnetic interference. Ensure connectors are fully seated to maintain reliable contact and performance for Gigabit and 10 Gigabit links.

Recommendations

For optimal performance, maintain bend radius guidelines specified by your cabling standards, keep the cable away from unshielded power lines, and verify link speed and integrity after installation. Use the yellow colour for easy identification in dense cabling environments.
Destaques principais
  • Assignment according to TIA/EIA 568B2.1
  • cable construction S/FTP (PiMf) 4x2xAWG26/7
  • overall braided shield with paired foil shield
  • Cable sheath halogen free, LSZH, conform to standards IEC 60332-1-2, IEC 60754-1, IEC 60754-2, IEC 61034 IEC332-1
  • plug RJ45 (8P8C) with 50µ" gold plated contacts and with special design and latch protection
  • blue colored plug for easy distinction
  • For Gigabit and 10 Gigabit applications
  • to 500MHz: 100% Cat.6 test and 100% Cat.6A test (Fluke Channel Link Test) including the attached test protocol and serial number
  • in reclosable PE bag with EAN code
  • 7.5 m
  • RJ-45 Male
  • RJ-45 Male
  • Cat6a S/FTP (S-STP)
  • 10 Gigabit Ethernet 10000 Mbit/s
  • Yellow
Especificações
Altura
15 mm
Altura da embalagem
29 mm
Bitola do fio (AWG)
26/7
Blindagem do cabo
S/FTP (S-STP)
Certificação
TIA / EIA 568B2.1
Comprimento do cabo
7.5 m
Conector 1
RJ-45
Conector 2
RJ-45
Cor do produto
Yellow
Dimensões (LxAxP)
12 x 7500 x 15 mm
Frequência
500 MHz
Género do conector 1
Male
Género do conector 2
Male
Largura
12 mm
Largura da embalagem
200 mm
Material da bainha
Low smoke zero halogen (LSZH)
Material do condutor
Copper
Não contém
Halogen
Norma do cabo
Cat6a
Peso
298 g
Peso da embalagem
254 g
Profundidade
7500 mm
Profundidade da embalagem
245 mm
Quantidade por embalagem
1 pc(s)
Taxa de transferência de dados
10000 Mbit/s
Tipo de acoplamento de par entrançado
4x2
Tipo de condutor
Solid
Tipo de embalagem
Polybag
Tipo de interface Ethernet
10 Gigabit Ethernet
Volume da embalagem
1400 cm³

Folheto

Abrir documento
Histórico de preços nos últimos 6 meses
Cabo de rede InLine S/FTP PiMF Cat.6A sem halogéneos 500 MHz amarelo 7,5 m
Atual
13,54 €
Mais baixo
12,97 €
Mais alto
17,03 €
Variação 24 h
+0,55 €   +4%
Semana
+0,37 €   +3%
Mês
+0,39 €   +3%

Produtos populares nesta categoria

Olá, sou o assistente de IA da DistriNode. Posso ajudá-lo a encontrar produtos, comparar opções, criar orçamentos em PDF ou abrir pedidos de suporte.