Cabo de rede Microconnect MC-SFTP805W branco 5 m Cat8.1 S/FTP (S-STP)

The MicroConnect CAT8.1 Patch Cable (MC-SFTP805W) is a 5 m high-performance networking cable designed for demanding environments that require high data rates and wide bandwidth. It supports the Cat8.1 standard with S/FTP shielding and RJ-45 connectors with gold-plated contacts, enabling data transfer rates up to 40000 Mbit/s and bandwidth up to 2000 MHz. The cable features 50µ" RJ45 connectors for improved contact reliability, latch protection to reduce the risk of clip damage, and meter markings on the boot for easy length identification.

Advantages

The cable combines Cat8.1 performance and S/FTP shielding to reduce electromagnetic interference and maintain signal integrity at high speeds. Gold-plated contacts improve conductivity and corrosion resistance, while 50µ" connectors and latch protection increase mechanical reliability. Meter markings on the boot simplify installation and cable management in racks and structured cabling systems.

Suitable for

• High-speed server-to-switch connections
• Data center uplinks and short-distance backbones
• Applications requiring up to 25 Gbps or higher throughput
• Environments needing improved shielding against interference

Key specifications

• Standard: Cat8.1
• Shielding: S/FTP (shielded foil with braided shield)
• Length: 5 m
• Connectors: RJ-45 to RJ-45
• Maximum data rate: up to 40000 Mbit/s
• Bandwidth: up to 2000 MHz
• Connector plating: gold-plated contacts
• Colour: White
• Weight: 0.49 kg

How to use

Connect one RJ-45 connector to the network port of your device (switch, server, router or network interface) and the other RJ-45 connector to the corresponding port on the remote device. Ensure connectors are fully inserted until the latch clicks. Use the meter markings on the boot to confirm cable length during installation and route the cable to avoid sharp bends and tight bends that may affect performance.

Recommendations

For optimal performance, use this Cat8.1 S/FTP cable for short to medium runs within racks or between adjacent racks in data centers and enterprise networks. Avoid exposing the cable to strong electromagnetic sources and maintain bend radius recommended by industry standards.