Cabo de rede SF/UTP Cat.5e InLine azul 10m

The InLine SF/UTP Cat.5e 10m patch cable is a 10-metre network cable with RJ-45 connectors on both ends, suitable for connecting switches, routers, sockets, patch panels and network cards. Designed for Cat.5e performance with SF/UTP shielding, it supports Gigabit Ethernet speeds up to 1 Gbit/s at frequencies up to 125 MHz. The cable is blue and intended for home and office network connections.

Advantages

SF/UTP shielding reduces electromagnetic interference and helps maintain signal quality in environments with potential crosstalk. The cable supports 10/100/1000Base-T(X) Ethernet standards and provides reliable wired connections using standard RJ-45 connectors. A 10 m length offers flexibility for typical office and residential installations.

Suitable for

• Connecting PCs, switches and routers in home and small office networks
• Patch panel to switch or socket connections in structured cabling
• Gigabit Ethernet links where Cat.5e performance is sufficient

Key specifications

• Length: 10 m
• Cabling technology: 10/100/1000Base-T(X)
• Connectors: RJ-45 to RJ-45
• Category: Cat.5e (SF/UTP)
• Maximum data rate: 1000 Mbit/s
• Maximum frequency: 125 MHz
• Colour: Blue

How to use

Insert each RJ-45 connector into the corresponding network port on devices such as switches, routers, network cards or wall sockets until the latch clicks. Route the cable to avoid tight bends and sources of strong electromagnetic interference. For structured cabling, connect one end to the patch panel or wall socket and the other to the switch or end device.

Recommendations

Use the cable within its specified 10 m length and avoid kinking or excessive pulling. Keep the cable away from high-voltage power lines and strong EMI sources for best performance. For higher bandwidth or longer runs, consider Cat.6 or fiber solutions.