Cabo HDMI DELOCK 3 m — tipo A (macho) para tipo C (Mini) (macho), 48 Gbit/s, até 7680×4320, contactos dourados, preto

The DELOCK HDMI cable 3 m with Type A (Male) to Type C (Mini) (Male) connectors provides a direct connection between devices with a Mini HDMI interface—such as cameras, tablets or laptops—and displays or TVs with a standard HDMI port. The cable supports up to 48 Gbit/s bandwidth and resolutions up to 7680 × 4320 @ 60 Hz, with support for 3D, Dynamic HDR and Dolby Vision for improved colour, contrast and brightness reproduction. Gold-plated contacts and a braided, triple-shielded coaxial cable construction help maintain reliable signal transmission, while eARC support allows lossless audio return to compatible sound systems.

Advantages

This 3 m HDMI cable combines a high maximum data rate (48 Gbit/s) with support for 8K resolution at 60 Hz and multiple high-performance video features including Dynamic HDR, Dolby Vision and Display Stream Compression (DSC). Its triple shielding, braided jacket and gold-plated contacts reduce interference and improve connector reliability. eARC and support for high-resolution, multi-channel audio formats enable direct transmission of uncompressed audio to external sound systems.

Suitable for

• Connecting cameras or tablets with Mini HDMI output to TVs or monitors with standard HDMI input
• Home cinema setups requiring 4K/8K video and high-quality audio via eARC
• Gaming systems that benefit from features such as VRR and high frame rates

When it may not be suitable

The cable requires compatible source and display hardware to achieve the highest resolutions and frame rates; older devices or ports that do not support HDMI 2.1 features may be limited to lower bandwidths and resolutions. For very compact setups where a shorter or right-angled connector is needed, this straight 3 m cable may not be the best physical fit.

Key specifications

• Cable length: 3 m
• Connectors: HDMI Type A (Standard) male to HDMI Type C (Mini) male
• Maximum data transfer rate: up to 48 Gbit/s
• Maximum resolution: up to 7680 × 4320 @ 60 Hz; 5120 × 2880 @ 120 Hz; 3840 × 2160 @ 240 Hz (dependent on system hardware)
• Cable gauge and type: 36 AWG coaxial
• Cable diameter: approx. 3.5 mm
• Shielding: triple shielded
• Jacket: braided
• Contacts: gold-plated
• Supported features: Dynamic HDR, Dolby Vision, DSC 1.2, Game Mode VRR, 21:9 aspect ratio, 1080p HFR 3D, colour sampling 4:4:4, 4:2:2, 4:2:0
• Audio support: eARC, up to 32 audio channels, up to 1536 kHz sampling rate, Dolby TrueHD and DTS-HD Master Audio support
• Colour: black

How to use

Connect the HDMI Type C (Mini) male end to the Mini HDMI port of your camera, tablet or laptop and plug the HDMI Type A (Standard) male end into the HDMI input of your TV or monitor. Ensure both devices are powered and set the display input to the appropriate HDMI port. For full 8K/High Frame Rate features, check and enable relevant settings on both source and display devices and use compatible hardware that supports the necessary HDMI standards.

What to consider before purchase

• Confirm that both your source device and display support the desired resolution and HDMI features (e.g., HDMI 2.1, eARC, VRR)
• Verify that a 3 m straight cable and standard/mini connector orientation suit your physical setup
• Older devices may be limited to lower bandwidths and will not achieve maximum specified resolutions

Recommendations

For best results, use this cable with devices that explicitly support HDMI features such as 48 Gbit/s bandwidth, Dynamic HDR/Dolby Vision and eARC. When connecting to a home theatre receiver or soundbar, enable eARC on your TV and audio device to transmit uncompressed audio. Avoid sharp bends near the connectors to maintain signal integrity.