Conta Contactos
O seu carrinho
Envio por DPD e FedEx
Precisa de ajuda? Pergunte à IA

Cabo Patch InLine S/FTP PiMF Cat.6A sem halogéneos 500MHz verde 3m

Cabo Patch InLine S/FTP PiMF Cat.6A sem halogéneos 500MHz verde 3m
Cabo Patch InLine S/FTP PiMF Cat.6A sem halogéneos 500MHz verde 3m
Cabo Patch InLine S/FTP PiMF Cat.6A sem halogéneos 500MHz verde 3m
Cabo Patch InLine S/FTP PiMF Cat.6A sem halogéneos 500MHz verde 3m
8,09 €
The InLine Patch Cable S/FTP PiMF Cat.6A halogen free 500MHz green 3m is a high-performance patch cable designed for professional cabling in Gigabit and 10 Gigabit networks. It measures 3 m, uses RJ-45 connectors on both ends and features S/FTP PiMF shielding for reduced electromagnetic interference... Ler mais
Stock 2 Código 308361 Marca INLINE Modelo 76803G Garantia 2 anos

Envios e devoluções

Entrega prevista Quinta-feira, Outubro 15
Receberá atualizações através do nosso sistema de seguimento detalhado
Opções de pagamento
Cartão bancárioVisaMastercardPayPalApple PayGoogle PayTransferência bancária

The InLine Patch Cable S/FTP PiMF Cat.6A halogen free 500MHz green 3m is a high-performance patch cable designed for professional cabling in Gigabit and 10 Gigabit networks. It measures 3 m, uses RJ-45 connectors on both ends and features S/FTP PiMF shielding for reduced electromagnetic interference. The halogen-free jacket improves safety in environments where fire protection and low-smoke, low-toxicity materials are required.

Advantages

This Cat.6A patch cable offers a 500 MHz bandwidth suitable for high-speed data transmission and supports reliable operation in data centers and server racks. The S/FTP PiMF construction provides individual foil shielding for pairs plus an overall braid, minimizing crosstalk and external interference. The halogen-free outer jacket reduces hazardous emissions in case of fire, and standard RJ-45 connectors ensure compatibility with existing networking equipment.

Suitable for

  • Gigabit and 10 Gigabit Ethernet installations
  • Data center and server rack cabling
  • High-density network environments requiring shielded cabling

Key specifications

  • Standard: Cat.6A
  • Shielding: S/FTP (PiMF)
  • Bandwidth: 500 MHz
  • Length: 3 m
  • Connectors: RJ-45 to RJ-45
  • Jacket: halogen-free
  • Colour: green

How to use

Connect one RJ-45 plug of the patch cable to the network port of a switch, patch panel or device and the other plug to the corresponding port on the receiving equipment. Route the cable through rack trays or cable management channels to avoid sharp bends and maintain the specified bend radius. For best performance, avoid running shielded cables in parallel with strong electrical power lines without appropriate separation.

Recommendations

For installations in data centers or professional network environments, verify connector terminations and the integrity of the shield contact at panels and patch panels. Use appropriate cable management and avoid excessive bends; replace cables that show visible damage to the jacket or connectors.
Destaques principais
  • Assignment according to TIA/EIA 568B2.1
  • cable construction S/FTP (PiMf) 4x2xAWG26/7
  • overall braided shield with paired foil shield
  • Cable sheath halogen free, LSZH, conform to standards IEC 60332-1-2, IEC 60754-1, IEC 60754-2, IEC 61034 IEC332-1
  • plug RJ45 (8P8C) with 50µ" gold plated contacts and with special design and latch protection
  • blue colored plug for easy distinction
  • For Gigabit and 10 Gigabit applications
  • to 500MHz: 100% Cat.6 test and 100% Cat.6A test (Fluke Channel Link Test) including the attached test protocol and serial number
  • in reclosable PE bag with EAN code
  • 3 m
  • RJ-45 Male
  • RJ-45 Male
  • Cat6a S/FTP (S-STP)
  • 10 Gigabit Ethernet 10000 Mbit/s
  • Green
Especificações
Altura
15 mm
Altura da embalagem
22 mm
Bitola do fio (AWG)
26/7
Blindagem do cabo
S/FTP (S-STP)
Certificação
TIA / EIA 568B2.1, IEC 60332-1-2, IEC 60754-1, IEC 60754-2, IEC 61034
Comprimento do cabo
3 m
Conector 1
RJ-45
Conector 2
RJ-45
Cor do produto
Green
Dimensões (LxAxP)
12 x 3000 x 15 mm
Frequência
500 MHz
Género do conector 1
Male
Género do conector 2
Male
Largura
12 mm
Largura da embalagem
175 mm
Material da bainha
Low smoke zero halogen (LSZH)
Material do condutor
Copper
Não contém
Halogen
Norma do cabo
Cat6a
Peso
123 g
Peso da embalagem
114 g
Profundidade
3000 mm
Profundidade da embalagem
225 mm
Quantidade por embalagem
1 pc(s)
Revestimento dos contactos do conector
Gold
Taxa de transferência de dados
10000 Mbit/s
Tipo de acoplamento de par entrançado
4x2
Tipo de embalagem
Polybag
Tipo de interface Ethernet
10 Gigabit Ethernet
Volume da embalagem
900 cm³

Folheto

Abrir documento
Histórico de preços nos últimos 6 meses
Cabo Patch InLine S/FTP PiMF Cat.6A sem halogéneos 500MHz verde 3m
Atual
8,09 €
Mais baixo
7,51 €
Mais alto
10,28 €
Variação 24 h
+0,47 €   +6%
Semana
+0,53 €   +7%
Mês
+0,56 €   +7%

Produtos populares nesta categoria

Olá, sou o assistente de IA da DistriNode. Posso ajudá-lo a encontrar produtos, comparar opções, criar orçamentos em PDF ou abrir pedidos de suporte.