Cabo SATA DeLOCK 60156 0,15 m SATA 15 pinos 4 x SATA 15 pinos Multicolor

The DeLOCK 60156 SATA power cable is a 0.15 m adapter that converts one SATA 15-pin power connector into four SATA 15-pin receptacles. It is intended for internal PC use (SATA I) and helps power multiple SATA devices from a single PSU connector. The cable’s multicolour design aids in identifying individual leads inside the system.

Advantages

The cable allows powering up to four SATA devices from a single SATA 15-pin power output, reducing the need for additional PSU connectors. Metal clips on each receptacle and a clearance on the plug ensure secure, reliable engagement with SATA power sockets. Its short length minimises cable clutter inside the chassis.

Suitable for

• Connecting multiple SATA hard drives or SSDs to one power supply connector
• Compact PC builds where cable length should be minimal
• System configurations using SATA I power interfaces

Key specifications

• Cable type: SATA I power
• Cable length: 0.15 m
• Connector 1: SATA 15-pin (plug)
• Connector 2: 4 × SATA 15-pin (receptacles) with metal clips
• Product colour: Multicolour
• Brand: DELOCK, MPN: 60156, EAN: 4043619601561

How to use

Disconnect the power supply before installation. Insert the single SATA 15-pin plug into a free SATA power connector from the PSU, ensuring the keyed orientation matches. Route the cable to your devices and plug each SATA 15-pin receptacle onto the power inlet of the HDD or SSD until the metal clip engages. Reconnect power and verify devices receive power.

Recommendations

Use this cable only for internal SATA power connections and within the electrical limits of your power supply. Avoid excessive bending or tension on the cable and do not use it to supply devices that require dedicated higher-current connectors. If devices fail to power, disconnect immediately and inspect connections.