Cabo SATA DeLOCK 85091 0,5 m SATA 7 pinos preto azul

This SATA cable by Delock enables the internal connection of various SATA devices such as HDDs, SSDs, controller cards or flash memories. It complies with the SATA III standard and supports data transfer rates up to 6 Gb/s while remaining backwards compatible with earlier SATA versions. The cable is 0.5 m long and comes in a black and blue design with SATA 7-pin connectors on both ends.

Advantages

The DeLOCK 85091 cable supports SATA III transfer speeds up to 6 Gb/s and is backwards compatible with previous SATA standards. Its metal clips on the connectors provide a secure click-in connection, and the 0.5 m length is suitable for internal PC routing where a short, reliable connection is required. The black and blue outer design offers durable protection for the conductors.

Suitable for

• Connecting internal HDDs and SSDs to a motherboard or controller card
• Connecting SATA-based flash memory modules or adapter cards
• Internal cable routing in desktop PCs and workstations where a 0.5 m cable is sufficient

Key specifications

• Cable type: SATA III
• Cable length: 0.5 m
• Connectors: SATA 7-pin to SATA 7-pin
• Data transfer rate: up to 6 Gb/s
• Product colour: Black, Blue
• Manufacturer / MPN: DELOCK, 85091

How to use

Route the 0.5 m SATA cable inside the computer case so that the cable leads downwards when connecting to a hard disk drive if required by drive placement. Align each SATA 7-pin connector with the device and motherboard SATA ports, press until the metal clip clicks to secure the connection, and ensure both ends are seated fully. Power off the system before connecting or disconnecting the cable.

Recommendations

Use this DeLOCK SATA III cable for internal connections in desktop PCs and workstations. For optimal performance ensure both connected devices support SATA III to achieve the full 6 Gb/s transfer rate; otherwise the speed will be limited to the lower supported SATA revision.