Cabo SATA InLine 6Gb/s com encaixes 0,5 m

The InLine SATA Cable 27305 is a 0.5 m internal SATA I cable in red, designed for connecting SATA devices such as hard drives and SSDs to a motherboard or controller. It supports the SATA 6 Gb/s transfer rate and maintains backward compatibility with earlier SATA versions, providing a reliable link for internal storage connections.

Advantages

The cable supports transfer rates up to 6 Gb/s, offers secure latching connectors to prevent accidental disconnection, and its 0.5 m length is suitable for typical PC internal routing. The red colour simplifies identification inside the system and the cable follows SATA I specifications while remaining compatible with newer and older SATA interfaces.

Suitable for

• Connecting internal hard drives (HDD) to motherboard or controller
• Connecting solid-state drives (SSD) to SATA ports
• PC builds and upgrades where a 0.5 m internal SATA cable is required

Key specifications

• Cable type: SATA I
• Transfer rate: up to 6 Gb/s
• Cable length: 0.5 m
• Product colour: Red
• Connectors: SATA with latches (secure locking)
• Brand: InLine, MPN: 27305, EAN: 4043718154128

How to use

Power off the computer and open the case. Route the 0.5 m SATA cable between the motherboard SATA port and the SATA device’s connector, ensuring the latch aligns with the drive connector. Push both ends firmly until the latch clicks to secure the connection. Close the case, power on the system and verify the device is detected in BIOS/UEFI or the operating system.

Recommendations

For optimal performance, use this SATA 6 Gb/s cable for internal connections between motherboard SATA ports and storage devices, avoid excessive bending or tension, and ensure latches are fully engaged. For long runs or external adapters, select a cable of appropriate length or type.