Cabo USB DeLOCK 85488 USB 2.0 2m USB B preto

This PoweredUSB cable from DeLOCK connects devices with a USB Type-B port and a Hosiden Mini‑DIN 3‑pin power port to a PC or hub with a PoweredUSB 24 V port. The cable combines USB 2.0 data transmission (up to 0.48 Gbit/s) and 24 V power delivery in a single lead, making it suitable for POS hardware such as receipt printers and payment terminals from manufacturers like Epson and Toshiba. The cable is 2 m long and comes in black.

Advantages

The DeLOCK 85488 cable provides combined data and power over a single cable, reducing the number of separate connections required for POS devices. Its USB 2.0 interface supports standard data rates up to 0.48 Gbit/s and the durable black jacket helps ensure reliable daily use. The specific connectors—USB Type‑B and Hosiden Mini‑DIN 3‑pin—match common POS equipment interfaces.

Suitable for

• Connecting receipt printers to a PoweredUSB 24 V port
• Powering and communicating with payment terminals
• Integrating POS peripherals (Epson, Toshiba and similar)
• Setups where a single cable for data and 24 V power is required

Key specifications

• Brand: DELOCK
• Model / MPN: 85488
• EAN: 4043619854882
• Connector 1: PoweredUSB 24 V (host/hub)
• Connector 2: USB Type‑B and Hosiden Mini‑DIN 3‑pin (device)
• USB version: USB 2.0 (up to 0.48 Gbit/s)
• Cable length: 2 m
• Color: Black

How to use

Connect the PoweredUSB 24 V plug to the matching port on the PC or hub. Plug the USB Type‑B and Hosiden Mini‑DIN 3‑pin ends into the corresponding ports on the POS device (printer, terminal). Ensure connectors are correctly aligned and fully inserted. After connection, the device should receive power and establish a USB 2.0 data link with the host; install any required drivers on the host system if prompted.

Recommendations

Use this cable with devices that explicitly support PoweredUSB 24 V and a Hosiden Mini‑DIN 3‑pin power input. Avoid sharp bends and excessive tension on the cable; route it away from heat sources and moving parts. Verify device compatibility (connector types and voltage) before use.