Conversor DeLOCK USB Type-C para SSD M.2 NVMe e SSD/HDD SATA com função de clonagem

The DeLOCK USB Type-C Converter enables simultaneous connection of one M.2 NVMe SSD (2242/2260/2280) and one 2.5" or 3.5" SATA HDD/SSD via a USB-C interface. It includes an integrated adapter to connect to USB Type-A ports and a built-in standalone clone function that copies data between NVMe and SATA drives without a PC. The converter is black and comes with a 0.3 m cable and a male SATA host interface.

Advantages

The converter supports M.2 NVMe SSDs in 2242, 2260 and 2280 sizes alongside standard 2.5" or 3.5" SATA drives, allowing flexible use for different drive types. A built-in clone function enables direct drive-to-drive cloning without connecting to a computer. The adapter on the cable provides backward compatibility with USB Type-A ports and is fixed on the cable to prevent loss. Tool-free installation of the M.2 SSD is possible by sliding the lid, securing the module with a rubber nipple on the PCB, and closing until it locks.

Suitable for

• Upgrading a laptop or desktop storage by cloning an OS or data from one drive to another
• Backing up data from an NVMe SSD to a SATA drive or vice versa
• Transferring files between drives during system migration
• Connecting an external NVMe and SATA drive to a computer via USB-C or USB-A (with adapter)

Key specifications

• Supported M.2 sizes: 2242, 2260, 2280 (NVMe)
• Supported SATA drives: 2.5" SSD / 3.5" HDD
• Interface: USB Type-C (with integrated USB Type-A adapter)
• Cable length: 0.3 m
• Clone function: standalone clone from NVMe to SATA and SATA to NVMe (no PC required)
• Product colour: Black
• Brand: DELOCK, MPN: 64190, EAN: 4043619641901

How to use

Insert the M.2 NVMe SSD into the M.2 slot, push the lid backwards and secure the module on the PCB using the rubber nipple, then reattach the lid until it locks. Connect the SATA drive to the SATA interface. Plug the cable into a USB-C port or use the attached adapter to connect to a USB-A port. For cloning without a PC, follow the device-specific button/LED sequence described in the product manual to start the clone process from NVMe to SATA or from SATA to NVMe.

Recommendations

Use the standalone clone function only with compatible drives and ensure both source and target drives are powered and correctly connected. Back up important data before cloning. Handle the M.2 module carefully and avoid excessive force when closing the lid to prevent damage.