Dissipador de calor DELOCK 18460 para M.2 SSD 2280 — alumínio/cobre, RGB 5V, preto

DELOCK 18460 is a heatsink designed for M.2 SSD 2280 modules. Constructed from aluminium with a copper heat pipe, it passively dissipates heat from the SSD using thermal conductive pads and a surrounding body. The unit has a black finish and an integrated 5 V ARGB LED strip on top that can be connected to a compatible motherboard for synchronized lighting.

Advantages

The combination of aluminium and a copper heat pipe improves thermal transfer from the SSD to the heatsink while keeping weight and profile suitable for desktop and small-form-factor installations. Passive cooling requires no additional power for fans and the integrated ARGB strip allows visual customization when connected to a 5 V header on the motherboard.

Suitable for

• Cooling M.2 SSD 2280 modules in desktop PCs
• Small-form-factor builds where a low-profile passive solution is needed
• Systems with a 5 V ARGB header for synchronized RGB lighting

When it may not be suitable

This heatsink is intended for M.2 2280 size SSDs only and is not compatible with other M.2 lengths. It provides passive cooling and may not be sufficient for sustained heavy workloads on very high-performance SSDs in poorly ventilated enclosures; active cooling solutions could be required in such cases.

Key specifications

• Form factor compatibility: M.2 2280 SSD
• Materials: Aluminium body with copper heat pipe
• Cooling type: Passive heatsink with thermal conductive pads
• Lighting: 5 V ARGB LED strip (requires motherboard 5 V ARGB header)
• Colour: Black

How to use

Place the thermal pads on the M.2 SSD contact areas, position the heatsink around the module and secure it according to the system’s M.2 mounting method. Connect the 5 V ARGB cable to the motherboard header if synchronized lighting is desired. Ensure the SSD and heatsink have correct clearance in the case before final installation.

What to consider before purchase

• Confirm your SSD is M.2 2280 size
• Check for available clearance around the M.2 slot in your case or motherboard layout
• Verify your motherboard has a 5 V ARGB header if you plan to use the LED lighting

Recommendations

For best thermal results, install the heatsink in a system with reasonable case airflow and ensure firm contact between thermal pads and the SSD. If you run sustained heavy workloads, monitor SSD temperatures and consider additional active cooling if temperatures remain high.