EHA Ponte de cabos de sinal 10 cm largura 1,5 m comprimento preto com faixa amarela 41902

Loose cables across walkways create serious tripping hazards and can be damaged by foot traffic or light carts. The EHA Signal Cable Bridge solves this problem by covering and protecting cables in a robust, slip-resistant channel. Its high-visibility yellow stripe warns people of the bump, while the black PVC body blends into most environments. Ideal for offices, workshops, events, and retail spaces, this bridge keeps floors safe and cables intact.

Who is it for

Anyone who needs to run cables across a floor where people walk or light wheeled equipment passes. Perfect for office managers, event technicians, workshop supervisors, and home users who want to eliminate trip risks and extend cable life.

Main features

• Single channel with 100 mm internal width and 10 mm height accommodates multiple cables or a thick power cord.
• Overall length 1.5 m covers typical doorways or aisle crossings; multiple units can be joined for longer runs.
• Durable PVC construction withstands foot traffic and light wheeled loads, suitable for indoor and outdoor use.
• Slip-resistant surface reduces the chance of slipping, even in wet conditions.
• High-contrast yellow signal stripe on black background increases visibility, alerting people to the cable protector.
• Lay-flat, free-standing design requires no installation; simply place over cables and walk.

Specifications

• Brand: EHA
• Model: 41902
• MPN: 41902
• EAN: 4259610600382
• Type: Cable Bridge / Cable Protector
• Material: PVC (Polyvinyl Chloride)
• Number of Channels: 1
• Channel Width: 100 mm
• Channel Height: 10 mm
• Overall Length: 1.5 m (1500 mm)
• Overall Width: 130 mm
• Overall Height: 18 mm
• Colour: Black with Yellow Signal Stripe
• Load Capacity: Suitable for foot traffic and light wheeled traffic
• Surface: Slip-resistant
• Usage Environment: Indoor / Outdoor
• Protection Features: Prevents tripping hazards, protects cables from damage
• Mounting Type: Free-standing / Lay-flat

Tips

For best results, ensure the floor is clean and dry before placing the bridge. When running multiple cables, arrange them flat inside the channel to avoid bulging. To create longer protected runs, align multiple bridges end-to-end; the flexible PVC allows slight bending around gentle curves. Regularly inspect the bridge for wear, especially in high-traffic areas, and replace if the surface becomes smooth or cracked.