Finder 20.23.9.024.4000 Relé de impulso, 2 NA, 16 A, bobina 24 V AC, calha DIN

The Finder 20.23.9.024.4000 is an impulse relay from the Series 20, designed for latching switching of lighting and other loads. It provides two normally open contacts and a 24 V AC coil, making it a reliable choice for push-button control circuits in residential and commercial installations.

Highlights

• Latching operation: the relay changes state with each coil pulse and holds position without continuous power.
• Two independent 16 A NO contacts for switching two separate circuits.
• Compact 2-module DIN rail housing, 35 mm rail mounting.
• Coil rated for 24 V AC, 50/60 Hz, with low power consumption of 5.5 VA.
• Silver nickel contacts for long electrical life.

In daily use

The relay is controlled by momentary push-buttons: each pulse toggles the contact state. This allows multiple control points without complex wiring. The mechanical indicator shows the current state, and the relay can also be manually operated via the lever on the front.

Full specifications

• Relay type: Impulse relay (latching)
• Series: 20
• Number of contacts: 2
• Contact configuration: 2 NO
• Contact material: AgNi (silver nickel)
• Rated current (resistive load): 16 A
• Max. switching voltage: 400 V AC
• Coil voltage: 24 V AC (50/60 Hz)
• Coil power: 5.5 VA
• Mounting: DIN rail (35 mm)
• Number of modules: 2
• Operating temperature range: -40 to +40 °C
• Protection degree: IP20
• Electrical life at rated load: 100,000 cycles
• Mechanical life: 1,000,000 cycles
• Dielectric strength (coil-contacts): 4 kV AC
• Max. cable cross-section: 6 mm² solid, 4 mm² stranded

Final note

A robust impulse relay for reliable switching of lighting and other loads, with manual override and clear status indication.