Injetor PoE ACT 95W IEEE 802.3bt, Gigabit Ethernet, 1000 Mbit/s, 10/100/1000, PoE++ (4PPoE), IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, Cat6a

Use the AC4439 95W 4PPoE Power over Ethernet adapter to power your network equipment via a single network cable up to 100m. Ideal for powering an access point, VOIP telephone, IP camera and more. The PoE injector has automatic power detection, Gigabit Ethernet and complies with the standards: IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt. The AC4439 is equipped with surge protection on both the Ethernet port and the 230V side. Mount the PoE injector to the wall via the integrated mounting bracket. For the best performance we strongly recommend using a full copper CAT6A cable.

4PPoE 95W PoE injector
The AC4439 PoE injector complies with the IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt PoE standards and is able to deliver max. 95W to high-performance network equipment and thus decreases the need for separate power supplies.

The PoE adapter has surge protection on both the 230V and the Ethernet side. We strongly recommend using a full copper CAT6A cable (max. 100 meters) to achieve the best performance.

The AC4439 Gigabit PoE+ Injector delivers up to 95W of power, with 5W used internally, leaving 90W for PoE devices. Over a 100m cable, the available power is reduced to a maximum of 72.36W due to cable loss. For the most PoE devices, this is enough power.