Módulo Keystone DELOCK RJ45 para LSA Cat.6A blindado sem ferramentas, plano, prateado/branco, com tampa de proteção contra pó

The DELOCK Keystone Module RJ45 to LSA Cat.6A shielded is a compact, tool-free connector designed for shielded Cat6A installations. It converts an RJ45 interface to an LSA termination block, allowing direct insertion of conductors without tools and providing integrated shielding continuity. The module features a flat profile and a snap-in form factor suitable for standard keystone housings, patch panels and wall plates. A dust protection cap is included to reduce contamination when the connector is not in use.

Advantages

This keystone module supports Cat6A shielded cabling and preserves shielding across the connector, enabling reliable high-frequency signal transmission. Its tool-free LSA termination simplifies installation and reduces the need for special tools, while the flat design minimizes space requirements in dense panel or mounting environments. The dust cap protects contacts during storage and handling, and the compact dimensions make the unit compatible with common keystone cutouts.

Suitable for

Key specifications

How to use

Prepare the shielded Cat6A cable by stripping the outer jacket and folding back the drain wire or foil shielding as required by your installation practice. Insert the individual conductors into the LSA termination slots following the cable's wiring scheme, then press the built-in cap or mechanism to secure the conductors without a punch-down tool. Snap the keystone module into the keystone cutout of a patch panel, wall plate or surface-mount box until it locks into place. Connect the RJ45 plug to the female RJ45 interface as needed and replace the dust cap when the connector is not in use.

Recommendations

For consistent performance, use this module with properly shielded Cat6A cables and ensure continuous grounding of the cable shield and module housing when installed in shielded panels or metal faceplates. Verify wiring order before termination and avoid excessive bending or tension on the cable near the module to maintain signal integrity.