Conta Contactos
O seu carrinho
Envio por DPD e FedEx
Precisa de ajuda? Pergunte à IA

Módulo transceptor de fibra ótica BlueOptics MCX0JXE51-BO SFP+ LC alumínio

Módulo transceptor de fibra ótica BlueOptics MCX0JXE51-BO SFP+ LC alumínio
Módulo transceptor de fibra ótica BlueOptics MCX0JXE51-BO SFP+ LC alumínio
Módulo transceptor de fibra ótica BlueOptics MCX0JXE51-BO SFP+ LC alumínio
Módulo transceptor de fibra ótica BlueOptics MCX0JXE51-BO SFP+ LC alumínio
Módulo transceptor de fibra ótica BlueOptics MCX0JXE51-BO SFP+ LC alumínio
Módulo transceptor de fibra ótica BlueOptics MCX0JXE51-BO SFP+ LC alumínio
Módulo transceptor de fibra ótica BlueOptics MCX0JXE51-BO SFP+ LC alumínio
Módulo transceptor de fibra ótica BlueOptics MCX0JXE51-BO SFP+ LC alumínio
Módulo transceptor de fibra ótica BlueOptics MCX0JXE51-BO SFP+ LC alumínio
Módulo transceptor de fibra ótica BlueOptics MCX0JXE51-BO SFP+ LC alumínio
Módulo transceptor de fibra ótica BlueOptics MCX0JXE51-BO SFP+ LC alumínio
Módulo transceptor de fibra ótica BlueOptics MCX0JXE51-BO SFP+ LC alumínio
Módulo transceptor de fibra ótica BlueOptics MCX0JXE51-BO SFP+ LC alumínio
Módulo transceptor de fibra ótica BlueOptics MCX0JXE51-BO SFP+ LC alumínio
Módulo transceptor de fibra ótica BlueOptics MCX0JXE51-BO SFP+ LC alumínio
Módulo transceptor de fibra ótica BlueOptics MCX0JXE51-BO SFP+ LC alumínio
52,19 €
The BlueOptics MCX0JXE51-BO SFP+ LC Aluminium is a fiber optic transceiver module designed for 10 Gbps multimode applications. Built in an aluminium housing and weighing approximately 20 g, this SFP+ module uses an LC duplex connector and follows MSA SFP+ form-factor standards to provide high-speed ... Ler mais
Stock 727 Código 1475905 Marca BLUEOPTICS Modelo MCX0JXE51-BO Garantia 2 anos

Envios e devoluções

Entrega prevista Terça-feira, Outubro 27
Receberá atualizações através do nosso sistema de seguimento detalhado
Opções de pagamento
Cartão bancárioVisaMastercardPayPalApple PayGoogle PayTransferência bancária

The BlueOptics MCX0JXE51-BO SFP+ LC Aluminium is a fiber optic transceiver module designed for 10 Gbps multimode applications. Built in an aluminium housing and weighing approximately 20 g, this SFP+ module uses an LC duplex connector and follows MSA SFP+ form-factor standards to provide high-speed optical connectivity for compatible network equipment. The module supports 10GBASE-SR multimode transmission with an 850 nm wavelength and is intended for short-range fiber links.

Advantages

The transceiver offers compact SFP+ form factor compatibility for a variety of switches, routers and storage systems, and is manufactured to comply with common MSA standards for host interoperability. Its aluminium case provides physical durability while keeping the module lightweight. The design supports simultaneous transmit and receive over LC duplex multimode fiber and offers digital diagnostics monitoring (DDM/DOM) capability when supported by the host, enabling real-time status reporting for voltage, temperature, optical power and laser bias current.

Suitable for

Key specifications

How to use

Install the transceiver into a compatible SFP+ slot on your switch, router or storage device, ensuring the host device supports 10GBASE-SR SFP+ modules and DDM if diagnostics are required. Connect LC duplex multimode fiber patch cords to the module with correct TX/RX orientation. Configure the host interface according to the equipment vendor instructions and verify link status and diagnostics through the host management interface. Remove the protective dust caps from the module and fiber connectors before insertion and replace them when the module is not in use.

Recommendations

Use multimode fiber of appropriate grade (OM3/OM4 recommended for optimal 10G performance over longer short-range distances), keep fiber connectors clean using proper cleaning tools, and ensure firmware and driver compatibility on host equipment to maintain link stability and enable DDM functions.

Destaques principais
  • 10 Gbps short-range multimode fiber links (data center patching)
  • Interconnects between switches, routers and servers supporting SFP+ 10GBASE-SR
  • Storage area network (SAN) and NAS uplinks using multimode fiber
  • Hardware platforms that accept SFP+ modules with LC duplex connectors
  • Form factor: SFP+ (10G)
  • Optical mode: Multimode fiber
  • Wavelength: 850 nm
  • Connector: LC duplex
  • Typical maximum distance: up to 300 meters on appropriate multimode fiber
  • Housing material: Aluminium
  • Weight: approximately 0.02 kg
  • Digital Diagnostics Monitoring (DDM/DOM): supported when host hardware provides interface support
Especificações
Comprimento de onda Rx (máx.)
850 nm
Comprimento de onda Tx (máx.)
850 nm
Conector de fibra ótica
LC
Cor do produto
Aluminium
Distância máxima de transmissão
300 m
Ethernet LAN
Yes
Período de garantia
5 year(s)
Peso
0.02 kg
Peso da embalagem
30 g
Quantidade por embalagem
1 pc(s)
Tecnologia de cablagem Ethernet de fibra
10GBASE
Temperatura de funcionamento (T-T)
0 - 70
Tipo de interface
SFP+
Tipo de interface Ethernet
10 Gigabit Ethernet
Tipo de transceiver SFP
Fiber optic
Histórico de preços nos últimos 6 meses
Módulo transceptor de fibra ótica BlueOptics MCX0JXE51-BO SFP+ LC alumínio
Atual
52,19 €
Mais baixo
51,60 €
Mais alto
61,50 €
Variação 24 h
+0,39 €   +1%
Semana
+0,28 €   +1%
Mês
-6,47 €   -11%

Produtos populares nesta categoria

Olá, sou o assistente de IA da DistriNode. Posso ajudá-lo a encontrar produtos, comparar opções, criar orçamentos em PDF ou abrir pedidos de suporte.