Conta Contactos
O seu carrinho
Black Weekaté −30 %faltam 8 d 07:20:28
Envio por DPD e FedEx
Precisa de ajuda? Pergunte à IA

Módulo transceptor de rede BlueOptics AOM-AQS-107-B0C2-CX

Módulo transceptor de rede BlueOptics AOM-AQS-107-B0C2-CX
Módulo transceptor de rede BlueOptics AOM-AQS-107-B0C2-CX
Módulo transceptor de rede BlueOptics AOM-AQS-107-B0C2-CX
Módulo transceptor de rede BlueOptics AOM-AQS-107-B0C2-CX
Módulo transceptor de rede BlueOptics AOM-AQS-107-B0C2-CX
Módulo transceptor de rede BlueOptics AOM-AQS-107-B0C2-CX
-11%
Black Week
60 mesesgrátis
Módulo transceptor de rede BlueOptics AOM-AQS-107-B0C2-CX
Módulo transceptor de rede BlueOptics AOM-AQS-107-B0C2-CX
Módulo transceptor de rede BlueOptics AOM-AQS-107-B0C2-CX
Módulo transceptor de rede BlueOptics AOM-AQS-107-B0C2-CX
Módulo transceptor de rede BlueOptics AOM-AQS-107-B0C2-CX
Módulo transceptor de rede BlueOptics AOM-AQS-107-B0C2-CX
121,94 €
136,89 €−11 %
PDF
PDF
Stock 90 Código 1470075 Modelo AOM-AQS-107-B0C2-CX Garantia 5 anos

Envios e devoluções

Entrega prevista segunda-feira, 7 de dezembro
Receberá atualizações através do nosso sistema de seguimento detalhado
Opções de pagamento
Cartão bancárioVisaMastercardApple PayGoogle PayTransferência bancária

Faça uma pergunta – o assistente IA responde de imediato.

Descrição

The BlueOptics AOM-AQS-107-B0C2-CX is a compact fiber optic network transceiver module designed for 10G data communication. It supports a maximum data transfer rate of 10000 Mbit/s using an SFP+ fiber optic connector and an RJ-45 electrical interface. The module is CE- and FCC-certified, weighs 20 g and is intended for high-speed links in compatible server, switch and storage systems, including Supermicro platforms.

Advantages

The module offers 10G throughput in an SFP+ form factor with an RJ-45 interface, enabling high-speed copper connectivity in systems that accept SFP+ modules. Its lightweight construction and standardized MSA-compatible design simplify installation and interoperability across equipment from different vendors. CE and FCC certifications provide conformity with common regulatory requirements. The short maximum transfer distance of up to 30 m is suitable for data center and server-rack connections where low latency and reliable 10G links are required.

Suitable for

  • 10 Gigabit links between switches, routers and servers within racks and short data center runs
  • Upgrading SFP+ ports to 10GBASE-T copper connectivity where RJ-45 interfaces are required
  • High-speed connections in Supermicro and other MSA-compliant hardware platforms
  • Environments requiring CE and FCC compliant transceivers for regulatory conformity

Key specifications

  • Maximum data transfer rate: 10000 Mbit/s (10 Gbps)
  • Maximum transfer distance: up to 30 m (copper RJ-45 link)
  • Connector type: SFP+ module with RJ-45 interface
  • Form factor: SFP+ compliant
  • Product colour: Silver
  • Weight: 0.02 kg
  • Certifications: CE, FCC

How to use

Insert the SFP+ transceiver into a compatible SFP+ port on the switch, router, server or storage device while the system is powered down or following the device manufacturer’s hot-swap procedure. Connect the RJ-45 copper cable to the module and configure the network interface on the host device if necessary. Verify link status and speed through the device management interface and check that the DDM/DOM diagnostics (if supported by the host) report normal operating values for power and temperature.

Recommendations

Install the transceiver in MSA-compliant ports to ensure proper compatibility; use Cat6a/Cat7 copper cabling for optimal 10GBASE-T performance over short runs and keep firmware and driver levels of host devices up to date to maintain link stability and diagnostics support.

Destaques principais
  • 10 Gigabit links between switches, routers and servers within racks and short data center runs
  • Upgrading SFP+ ports to 10GBASE-T copper connectivity where RJ-45 interfaces are required
  • High-speed connections in Supermicro and other MSA-compliant hardware platforms
  • Environments requiring CE and FCC compliant transceivers for regulatory conformity
  • Maximum data transfer rate: 10000 Mbit/s (10 Gbps)
  • Maximum transfer distance: up to 30 m (copper RJ-45 link)
  • Connector type: SFP+ module with RJ-45 interface
  • Form factor: SFP+ compliant
  • Product colour: Silver
  • Weight: 0.02 kg
  • Certifications: CE, FCC

Especificações

Especificações
Certificação
CE, FC
Certificados de sustentabilidade
RoHS
Conector de fibra ótica
SFP+
Cor do produto
Silver
Distância máxima de transmissão
30 m
Peso
0.02 kg
Peso da embalagem
30 g
Taxa máxima de transferência de dados
10000 Mbit/s
Tecnologia de cablagem Ethernet de cobre
10BASE
Temperatura máxima de funcionamento
70 °C
Tipo de interface
RJ-45
Tipo de transceiver SFP
Fibra ótica
Histórico de preços nos últimos 6 meses
Módulo transceptor de rede BlueOptics AOM-AQS-107-B0C2-CX
Atual
121,94 €
Mais baixo 7 d
121,94 €
Mais alto 7 d
129,07 €
Variação 24 h
-7,13 €   -6%
Variação 7 d
-5,82 €   -5%
Variação 30 d
-14,96 €   -11%

Escrever uma avaliação

Classificação *
O seu nome será apresentado publicamente – pode utilizar um pseudónimo. Convidamos os compradores a escrever avaliações; verificamo-las antes da publicação e publicamos também as avaliações críticas.

Mais produtos BLUEOPTICS nesta categoria

12

Produtos populares nesta categoria

8
Vendedor: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vílnius, Lituânia · Código da empresa 303192950 · NIF/IVA UE LT100008198612 · Envio a partir da UE (Lituânia)
WhatsApp
Messenger
Olá, sou o assistente de IA da DistriNode. Posso ajudá-lo a encontrar produtos, comparar opções, criar orçamentos em PDF ou abrir pedidos de suporte.
Todas as categorias