Módulo transceptor SFP BlueOptics SFP-GLX-LCI-10E-BO 1250 Mbit/s 1310 nm

The BlueOptics SFP-GLX-LCI-10E-BO is a compact fiber optic SFP transceiver module engineered for single-mode optical links. It supports a maximum data transfer rate of 1250 Mbit/s over a 1310 nm wavelength and uses an SFP interface in a metal housing. The module operates from a 3.3 V input supply, weighs approximately 3 g and is designed for insertion into compatible fiber-capable network equipment with LC duplex connections.

Advantages

The metal housing provides mechanical durability and supports standard SFP mounting. With support for 1250 Mbit/s data throughput at 1310 nm, the module is suitable for typical 1000BASE-LX single-mode applications where stable optical transmission over extended distances is required. Its low weight and standard form factor make it easy to install and replace in switches, routers or storage systems that accept SFP transceivers.

Suitable for

• Single-mode fiber Ethernet links (1000BASE-LX class) requiring 1310 nm transmission
• Upgrading or replacing SFP ports in switches, routers and storage devices that accept standard SFP modules
• Optical network segments where compact, metal-housed transceivers are preferred for durability

Key specifications

• Interface type: SFP form factor with LC duplex optical connection
• Maximum data transfer rate: 1250 Mbit/s
• Operating wavelength: 1310 nm
• Power supply: 3.3 V input
• Housing: metal
• Weight: approx. 0.003 kg
• Product colour: silver

How to use

Install the transceiver into an SFP-compatible slot on the target network device following the device manufacturer’s hot-swap or installation guidelines. Connect both ends of the link with appropriate single-mode LC duplex patch cables, ensuring correct Tx/Rx orientation. Verify link status through the host device interface and, if supported, enable or check digital diagnostics features to monitor optical parameters. Power the host device with the specified 3.3 V supply and confirm that software or firmware settings permit third-party SFP modules if required by the equipment.

Recommendations

Use single-mode LC duplex patch cords and adhere to bend-radius and cleanliness best practices for fiber connectors. Confirm hardware compatibility and, where available, enable digital diagnostics or monitoring functions for proactive link status checks.