Conta Contactos
O seu carrinho
Envio por DPD e FedEx
Precisa de ajuda? Pergunte à IA

Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm

Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
66,54 €
The BlueOptics SFP-10G-LR-X is a fiber optic SFP+ transceiver module engineered for high-speed data transfer up to 10000 Mbit/s. Operating at a wavelength of 1310 nm, this module supports long-distance optical links and is suitable for use in data centers, aggregation switches, and enterprise networ... Ler mais
Stock 2679 Código 1483096 Marca BLUEOPTICS Modelo SFP-10G-LR-X-BO Garantia 2 anos

Envios e devoluções

Entrega prevista Sexta-feira, Outubro 30
Receberá atualizações através do nosso sistema de seguimento detalhado
Opções de pagamento
Cartão bancárioVisaMastercardPayPalApple PayGoogle PayTransferência bancária

The BlueOptics SFP-10G-LR-X is a fiber optic SFP+ transceiver module engineered for high-speed data transfer up to 10000 Mbit/s. Operating at a wavelength of 1310 nm, this module supports long-distance optical links and is suitable for use in data centers, aggregation switches, and enterprise networks. The module conforms to standard SFP+ form factor and fits into compatible SFP+ ports to provide a reliable physical layer interface for 10 Gigabit Ethernet and other high-bandwidth applications.

Advantages

The transceiver provides a compact SFP+ form factor with a maximum data transfer rate of 10000 Mbit/s and single-mode fiber support at 1310 nm wavelength, enabling extended reach. It offers interoperability with a wide range of networking equipment that accept standard SFP+ modules, facilitating flexible deployment and straightforward upgrades. The module is designed for stable optical performance over long distances while maintaining low latency suitable for demanding network traffic.

Suitable for

Key specifications

How to use

Install the BlueOptics SFP-10G-LR-X by inserting the transceiver into an available SFP+ port on compatible networking equipment until it latches. Connect the appropriate single-mode optical fiber cable with matching connectors to the transceiver’s optical interface. Ensure port settings and link speeds on the switch or router are configured for 10 Gigabit operation. Monitor link status indicators on the device and verify optical link parameters through management interfaces as needed.

Recommendations

Before installation, verify compatibility with your switch or router and confirm that fiber type, connector type, and link budget meet your deployment requirements. Use certified single-mode fiber and check optical power budgets for long-distance runs. Handle the optical ports and connectors with care to avoid contamination — keep protective caps on when not in use and clean connectors according to established procedures.

Destaques principais
  • 10 Gigabit Ethernet links between switches and routers
  • Long-distance single-mode fiber connections in metro or campus networks
  • Data center uplinks and aggregation ports
  • Network equipment requiring SFP+ form-factor transceivers
  • Interface type: SFP+
  • Maximum data transfer rate: 10000 Mbit/s
  • Operating wavelength: 1310 nm
  • Form factor: SFP+ optical transceiver
  • Media type: single-mode fiber (optical)
Especificações
Comprimento de onda
1310 nm
Comprimento de onda Rx (máx.)
1310 nm
Comprimento de onda Tx (máx.)
1310 nm
Conector de fibra ótica
LC
Distância máxima de transmissão
10000 m
Ethernet LAN
Yes
Fibra monomodo (SMF) suportada
Yes
Quantidade por embalagem
1 pc(s)
Sistema duplex
Full
Taxa máxima de transferência de dados
10000 Mbit/s
Tecnologia de cablagem Ethernet de fibra
10GBASE
Tipo de interface
SFP+
Tipo de interface Ethernet
10 Gigabit Ethernet
Tipo de transceiver SFP
Fiber optic
Histórico de preços nos últimos 6 meses
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Atual
66,54 €
Mais baixo
65,81 €
Mais alto
71,60 €
Variação 24 h
+0,60 €   +1%
Semana
+0,29 €   +0%
Mês
-0,26 €   0%

Produtos populares nesta categoria

Vendedor: UAB KUR LT · Laisvės pr. 125A, LT-06118 Vílnius, Lituânia · Código da empresa 303192950 · NIF/IVA UE LT100008198612 · Envio a partir da UE (Lituânia)
Olá, sou o assistente de IA da DistriNode. Posso ajudá-lo a encontrar produtos, comparar opções, criar orçamentos em PDF ou abrir pedidos de suporte.