Conta Contactos
O seu carrinho
Envio por DPD e FedEx
Precisa de ajuda? Pergunte à IA

Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s

Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
52,19 €
The BlueOptics TN-SFP-10G-SR-BO is an SFP+ fiber optic transceiver module designed for optical networks requiring 10G data rates. It supports a maximum data transfer rate of 10000 Mbit/s, uses an SFP+ interface and is housed in a durable silver metal casing that weighs approximately 20 g. The module... Ler mais
Stock 913 Código 1485762 Marca BLUEOPTICS Modelo TN-SFP-10G-SR-BO Garantia 2 anos

Envios e devoluções

Entrega prevista Sexta-feira, Outubro 23
Receberá atualizações através do nosso sistema de seguimento detalhado
Opções de pagamento
Cartão bancárioVisaMastercardPayPalApple PayGoogle PayTransferência bancária

The BlueOptics TN-SFP-10G-SR-BO is an SFP+ fiber optic transceiver module designed for optical networks requiring 10G data rates. It supports a maximum data transfer rate of 10000 Mbit/s, uses an SFP+ interface and is housed in a durable silver metal casing that weighs approximately 20 g. The module implements short-range multi-mode fiber transmission with an LC duplex optical connector and is built to conform with MSA mechanical and electrical standards, providing plug-and-play compatibility with equipment that supports 10GBASE-SR SFP+ modules.

Advantages

The transceiver offers compatibility with standard SFP+ ports and a compact metal form factor that simplifies installation and thermal performance. With a specified MTBF of 1,000,000 hours and a lightweight design, the module is intended to deliver long operational life and minimal maintenance requirements. Its silver metal housing and standard LC duplex connector make it suitable for integration into a wide range of switches, routers and storage interfaces that accept SFP+ optics.

Suitable for

Key specifications

How to use

Power down or follow hot-swap procedures recommended by your equipment vendor before inserting or removing the SFP+ transceiver. Align the LC duplex connector and gently insert the module into the SFP+ slot until it latches. Connect multi-mode fiber patch cords with matching LC duplex connectors and verify link status through your switch or router management interface. If the host device supports digital diagnostics, enable monitoring to view parameters such as optical power and temperature where supported.

Recommendations

Use short-wave 850 nm multi-mode fiber and high-quality LC duplex patch cords for optimal short-range performance. Ensure the host equipment explicitly supports 10GBASE-SR SFP+ modules and, if available, enable digital diagnostics monitoring for proactive link management. Follow manufacturer guidelines for hot-swap handling and ESD precautions during installation.

Destaques principais
  • Short-range 10G Ethernet links over multi-mode fiber
  • Interconnects between switches and routers in data center racks
  • High-speed uplinks for storage systems and aggregation points
  • Interface type: SFP+
  • Maximum data transfer rate: 10000 Mbit/s (10G)
  • Optical connector: LC duplex
  • Transmission medium: Multi-mode fiber (short-range)
  • Housing material and colour: metal, silver
  • Weight: 0.02 kg
  • Mean time between failures (MTBF): 1,000,000 hours
Especificações
Comprimento de onda Rx (máx.)
850 nm
Comprimento de onda Tx (máx.)
850 nm
Conector de fibra ótica
LC
Cor do produto
Silver
Distância máxima de transmissão
300 m
Ethernet LAN
Yes
Fibra multimodo (MMF) suportada
Yes
Material da carcaça
Metal
Norma do transceiver SFP
SR
Peso
0.02 kg
Peso da embalagem
30 g
Taxa máxima de transferência de dados
10000 Mbit/s
Tecnologia de cablagem Ethernet de fibra
10GBASE
Temperatura de funcionamento (T-T)
0 - 70
Temperatura máxima de funcionamento
70 °C
Temperatura mínima de funcionamento
0 °C
Tempo médio entre falhas (MTBF)
1000000 h
Tipo de interface
SFP+
Tipo de interface Ethernet
10 Gigabit Ethernet
Tipo de transceiver SFP
Fiber optic
Histórico de preços nos últimos 6 meses
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Atual
52,19 €
Mais baixo
51,45 €
Mais alto
61,31 €
Variação 24 h
+0,62 €   +1%
Semana
+0,72 €   +1%
Mês
-6,13 €   -11%

Produtos populares nesta categoria

Olá, sou o assistente de IA da DistriNode. Posso ajudá-lo a encontrar produtos, comparar opções, criar orçamentos em PDF ou abrir pedidos de suporte.