NZR EcoCount SL contador de energia trifásico, 5(1)A CT, Modbus RTU, MID, calha DIN 33420505

The NZR EcoCount SL 33420505 is a MID-compliant 3-phase energy meter designed for indirect connection via current transformers with a 5(1)A secondary. Unlike basic pulse-only meters, it integrates Modbus RTU over RS485, enabling direct integration into building management and industrial automation systems. Its 4-module DIN rail housing and backlit LCD make it suitable for sub-metering in commercial and industrial distribution boards.

Highlights

• MID certified (EN 50470-1/3) for billing-grade active energy measurement, Class B accuracy.
• Modbus RTU (RS485) interface for remote reading and configuration.
• Supports multi-tariff operation (up to 2 tariffs) and two configurable S0 pulse outputs.
• Measures active and reactive energy, voltage, current, power, frequency, and power factor.
• Compact 4-module (72 mm) DIN rail mounting, IP20 protection.

In daily use

Install the meter on a standard DIN rail and connect the CT secondary wires to the 5(1)A inputs. The backlit LCD provides clear local readings, while the Modbus interface allows integration with energy management software. Configure the S0 outputs for pulse counting or tariff switching. The meter operates over a wide temperature range from -25°C to +55°C, suitable for most indoor electrical cabinets.

Full specifications

• Meter type: Electronic energy meter
• Phase type: 3-phase
• Connection type: Indirect (via current transformers)
• Nominal current (CT secondary): 5(1) A
• Maximum current: 6 A
• Nominal voltage: 3x230/400 V AC
• Frequency: 50/60 Hz
• Communication interface: Modbus RTU (RS485)
• Accuracy class (active energy): Class B (EN 50470-3)
• Display: LCD with backlight
• Measured parameters: Active energy (kWh), reactive energy (kvarh), voltage, current, power, frequency, power factor
• Tariff support: Multi-tariff (up to 2 tariffs)
• Pulse outputs: 2x S0 (configurable)
• Mounting: DIN rail (EN 60715)
• Width: 4 modules (72 mm)
• Protection class: IP20
• Operating temperature: -25°C to +55°C

Final note

The EcoCount SL is a versatile choice for professionals needing reliable MID-compliant measurement with modern communication capabilities in a compact form factor.