Conta Contactos
O seu carrinho
Envio por DPD e FedEx
Precisa de ajuda? Pergunte à IA

Placa de rede PLANET ENW-9803 interna Ethernet 10000 Mbit/s

Placa de rede PLANET ENW-9803 interna Ethernet 10000 Mbit/s
Placa de rede PLANET ENW-9803 interna Ethernet 10000 Mbit/s
176,02 €
PDF
PDF
Stock 6 Código 2572205 Modelo ENW-9803 Garantia 3 anos

Envios e devoluções

Entrega prevista terça-feira, 15 de dezembro
Receberá atualizações através do nosso sistema de seguimento detalhado
Opções de pagamento
Cartão bancárioVisaMastercardPayPalApple PayGoogle PayTransferência bancária

Faça uma pergunta – o assistente IA responde de imediato.

Descrição

The PLANET ENW-9803 is an internal 10 Gigabit Ethernet PCI Express network card that delivers multi-rate copper connectivity up to 10 Gbit/s using an integrated Marvell 88X3310P NBASE-T PHY. It supports auto-negotiation across 10GbE, 5GbE, 2.5GbE, 1GbE and 100MbE over Cat5e/Cat6 or better cabling, IEEE 802.3 Energy Efficient Ethernet (EEE), and standard PCI Express host interface for use in servers, workstations and PCs.

Advantages

The ENW-9803 provides cost-effective 10G copper connectivity with low power consumption and a single-port design. Compared with CX4 or SFP+ solutions, it uses RJ45 and standard Cat6a/Cat7 cabling to reach up to 100 meters, avoiding the additional cost of SFP+ transceivers while supporting flexible multi-rate operation. The adapter supports IEEE 802.1Q VLAN, 9K jumbo frames and IEEE 802.3 flow control to optimize throughput and reduce packet loss.

Suitable for

  • Application servers and high-end workstations requiring higher bandwidth
  • Personal computers migrating from 1GbE to 10GbE for data-intensive tasks
  • Low- to mid-range network appliances needing a single-port 10G copper NIC

Key specifications

  • Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
  • Host interface: PCI Express
  • Connectivity technology: Wired, RJ45 (10GBASE-T)
  • PHY: Marvell 88X3310P NBASE-T with IEEE 802.az EEE support
  • Supported link speeds: 10G / 5G / 2.5G / 1G / 100M auto-negotiation
  • Standards: IEEE 802.1Q, IEEE 802.3an, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
  • Jumbo frame support: up to 9K
  • Cable: Cat5e/Cat6 (better reach with Cat6a/Cat7 up to 100 m)
  • Colour/finish: Green, stainless steel
  • Weight: 0.045 kg

How to use

Install the ENW-9803 into an available PCI Express slot on a compatible motherboard, secure the card in the chassis and connect the network via an RJ45 cable to a switch or router that supports the desired link speed. Ensure the system BIOS and operating system recognize the PCIe device and install the appropriate drivers for your operating system (Windows Server, Linux, VMware). After driver installation, configure network settings and VLANs as required through the OS network management tools.

Recommendations

Use Cat6a or Cat7 cabling to achieve full 10G reach up to 100 meters. For mixed-speed environments, rely on the adapter's auto-negotiation to select optimal link speed. Keep drivers up to date and enable jumbo frames and flow control if your network and applications benefit from larger MTU and lossless transfers.
Destaques principais
  • Application servers and high-end workstations requiring higher bandwidth
  • Personal computers migrating from 1GbE to 10GbE for data-intensive tasks
  • Low- to mid-range network appliances needing a single-port 10G copper NIC
  • Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
  • Host interface: PCI Express
  • Connectivity technology: Wired, RJ45 (10GBASE-T)
  • PHY: Marvell 88X3310P NBASE-T with IEEE 802.az EEE support
  • Supported link speeds: 10G / 5G / 2.5G / 1G / 100M auto-negotiation
  • Standards: IEEE 802.1Q, IEEE 802.3an, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
  • Jumbo frame support: up to 9K
  • Cable: Cat5e/Cat6 (better reach with Cat6a/Cat7 up to 100 m)
  • Colour/finish: Green, stainless steel
  • Weight: 0.045 kg

Especificações

Especificações
Altura
22 mm
Certificação
FCC Parte 15 Classe B, CE
Código do Sistema Harmonizado (HS)
85176990
Compatibilidade com controlo de fluxo
Sim
Compatibilidade com jumbo frames
Sim
Componente para
PC
Consumo de energia (típico)
5 W
Cor do produto
Verde, aço inoxidável
Duplex integral
Sim
Guia de início rápido
Sim
Humidade relativa de armazenamento (H-H)
5 - 95
Humidade relativa de funcionamento (H-H)
5 - 95
Indicadores LED
Y
Interface
Ethernet
Interface do anfitrião
PCI Express
Interno
Sim
Largura
82 mm
Manual
Sim
Memória interna
1 MB
Normas de rede
IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3an, IEEE 802.3u, IEEE 802.3x
Peso
0.045 kg
Portas Ethernet LAN (RJ-45)
1
Profundidade
120 mm
Protocolos de rede suportados
IP, TCP, UDP
Sistemas operativos Linux compatíveis
Y
Sistemas operativos Windows compatíveis
Y
Suporte de perfil baixo
Sim
Taxa máxima de transferência de dados
10000 Mbit/s
Tecnologia de cablagem
10/100/1000BaseT(X)
Tecnologia de conectividade
Com fios
Temperatura de armazenamento (T-T)
-10 - 85
Temperatura de funcionamento (T-T)
0 - 50

Folheto

Abrir documento
Histórico de preços nos últimos 6 meses
Placa de rede PLANET ENW-9803 interna Ethernet 10000 Mbit/s
Atual
176,02 €
Mais baixo 7 d
174,17 €
Mais alto 7 d
176,02 €
Variação 24 h
0,00 €   0%
Variação 7 d
+1,85 €   +1%
Variação 30 d
0,00 €   0%

Escrever uma avaliação

Classificação *
O seu nome será apresentado publicamente – pode utilizar um pseudónimo. Convidamos os compradores a escrever avaliações; verificamo-las antes da publicação e publicamos também as avaliações críticas.

Produtos populares nesta categoria

8
Vendedor: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vílnius, Lituânia · Código da empresa 303192950 · NIF/IVA UE LT100008198612 · Envio a partir da UE (Lituânia)
WhatsApp
Messenger
Olá, sou o assistente de IA da DistriNode. Posso ajudá-lo a encontrar produtos, comparar opções, criar orçamentos em PDF ou abrir pedidos de suporte.
Todas as categorias