Placas de base MDF 2mm MAKERA Carvera Air (5 unid.) – placa sacrificial para CNC

Replacement sacrificial base panels for the MAKERA Carvera Air CNC machine, precision-cut from 2mm medium-density fibreboard. These panels protect the machine bed from tool marks and provide a stable, flat surface for consistent carving results.

Advantages

Each pack contains five identical panels, so you can swap in a fresh surface whenever the current one becomes scored or worn. The smooth, uncoated MDF offers uniform density and a clean cutting bed, while the natural wood tone makes it easy to see layout marks. E1 formaldehyde emission rating keeps workshop air safer.

Suitable for

• Carvera Air owners who need a disposable wasteboard for everyday CNC routing
• Laser engraving and cutting tasks that require a flat, low-cost base
• Prototyping and small-batch production where quick bed replacement is essential

Key specifications

• Material: Medium-density fibreboard (MDF), 2 mm thick
• Panel size: 200 x 200 mm – matches Carvera Air work area
• Pack contents: 5 panels
• Surface: smooth, uncoated, raw cut edges
• Density: approximately 600–800 kg/m³
• Formaldehyde emission standard: E1

Recommendations

Keep a spare pack on hand so you can replace the wasteboard immediately after deep cuts or laser work. For best adhesion, secure the panel with low-tack tape or clamps before starting a job.