Pollmann Chicote de cabos de saída KB Y88M 5 polos 10mm² L1/L2/L3 575mm N/PE 1100mm

Most output cable harnesses keep all conductors the same length, but the Pollmann KB Y88M takes a different approach: its three phase conductors are trimmed to 575 mm, while neutral and protective earth extend to 1100 mm. That extra reach on N and PE simplifies termination at busbars or terminal blocks, eliminating the need for extension joints and reducing clutter inside control panels and switchgear. Built with five flexible 10 mm² copper conductors and PVC insulation, this harness is a practical, industrial-grade solution for power distribution tasks.

Highlights

• 5-pole configuration: L1, L2, L3, N, PE
• 10 mm² cross-section for robust current handling
• Asymmetric lengths: phases 575 mm, N/PE 1100 mm
• Flexible copper conductors (Class 5) for easy routing
• PVC insulation, rated for low-voltage power distribution
• Open ends for direct connection to terminals

In daily use

Technicians will appreciate how the longer neutral and PE conductors reduce the need for extension joints or awkward bends when connecting to busbars or terminal blocks. The flexible copper strands make the harness easy to dress and secure inside enclosures, while the standard colour coding—brown, black, grey for phases, blue for neutral, and green/yellow for earth—keeps identification straightforward during installation and maintenance. The PVC insulation provides a good balance of mechanical protection and flexibility for typical indoor industrial environments.

Full specifications

• Product type: Output cable harness
• Number of conductors: 5 (L1, L2, L3, N, PE)
• Conductor cross-section: 10 mm²
• Conductor material: Copper
• Insulation material: PVC (Polyvinyl Chloride)
• Conductor length L1, L2, L3: 575 mm each
• Conductor length N, PE: 1100 mm each
• Rated voltage: Typically 450/750V or 0.6/1kV (for low voltage power distribution)
• Colour coding: Brown, black, grey for L1, L2, L3; blue for N; green/yellow for PE
• Termination: Open ends (for direct connection to terminals)
• Application: Power distribution in switchgear, control panels, and industrial machinery
• Conductor flexibility: Flexible (Class 5 according to VDE 0295/IEC 60228)
• Operating temperature range: Typically -5°C to +70°C (for PVC insulated cables)
• Halogen-free: No (PVC insulated)
• Outer sheath: No (individual insulated conductors bundled)
• Standards compliance: Designed for industrial electrical installations

Final note

A smart choice for panel builders who need a reliable, ready-to-install power harness with the right lengths where they matter most.