Rolo de fita adesiva de transferência 3M ATG 904, 19 mm x 44 m para aplicador manual

3M ATG 904 adhesive transfer film, 19 mm x 44 m, is a thin, double-sided pressure-sensitive adhesive product formulated for use with compatible hand dispensers. The transfer film transfers a continuous, permanent adhesive layer onto substrates such as paper, cardboard and photos, offering fast bonding without the thickness of traditional double-sided tapes. Its narrow width and long roll length are suited to repetitive mounting and craft work where precise, low-profile adhesion is required.

Advantages

The adhesive transfer film provides a uniform, low-build adhesive layer that minimizes visible seams and bulk at joins, enabling discreet fixation of lightweight materials. Because the product dispenses as a continuous film, it produces clean edges and reduces manual trimming and waste. The pressure-sensitive formulation bonds quickly at room temperature, offering immediate handling strength for paper-based and similarly porous substrates. Compatibility with hand dispensers allows controlled application speed and placement accuracy.

Suitable for

Key specifications

How to use

Install the roll into a compatible hand dispenser following the dispenser manufacturer’s instructions. Position the dispenser at the start point on the substrate and apply steady pressure while moving along the intended bonding line to transfer the adhesive film. After dispensing, remove the release liner if present and press the bonded surfaces together evenly to ensure full contact and adhesion. For best results, apply at room temperature and allow immediate light handling; full long-term bond develops with standard ambient aging.

Recommendations

Test adhesion on a sample area before full application when working with coated or non-porous surfaces. Store the film in a cool, dry place away from direct sunlight to preserve adhesive performance. Avoid use on heavily textured or oily substrates where contact may be incomplete.