Router TENDA 4G08 4G LTE Wi‑Fi dual‑band 2,4/5 GHz, 4 antenas integradas, 2 portas LAN, até 867/300 Mbit/s

TENDA 4G08 is a 4G LTE Wi‑Fi router that provides dual‑band wireless connectivity on 2.4 GHz and 5 GHz with four integrated antennas and two Ethernet LAN ports. The device supports IEEE 802.11b/n/ac standards and delivers maximum wireless data rates up to 867 Mbps on the 5 GHz band and up to 300 Mbps on the 2.4 GHz band. It includes web-based management, DHCP client and server functions, WPA3-SAE/WPA2-PSK security, LED indicators and a reset button. The router is designed for desktop or wall placement and operates across wide temperature and humidity ranges for home or small office environments.

Advantages

The router offers simultaneous dual‑band operation to reduce interference and improve throughput, four integrated antennas for enhanced signal coverage, and two Gigabit Ethernet ports for wired connections. Built‑in security protocols (WPA3/WPA2) and web-based management simplify setup and day‑to‑day administration. Compact design with LED indicators and a reset button supports both desk and wall mounting.

Suitable for

• Home internet access with 4G LTE backup
• Small office wireless networking
• Locations requiring both wired and wireless connections
• Environments needing dual‑band capability to separate devices by frequency

Key specifications

• Wireless bands: 2.4 GHz and 5 GHz
• Maximum Wi‑Fi data rates: up to 867 Mbps (5 GHz) and up to 300 Mbps (2.4 GHz)
• Supported standards: IEEE 802.11b/n/ac
• Channel bandwidths: 2400–2483.5 MHz; 5150–5850 MHz
• Ethernet LAN ports: 2 (RJ‑45), 10/100/1000 Mbit/s
• Antennas: 4 integrated antennas
• Power input: AC 100–240 V, input current 1 A
• Security: WPA3‑SAE and WPA2‑PSK
• Management: web‑based management interface
• Operating temperature: -5 to 45 °C; storage temperature: -40 to 70 °C
• Operating humidity: 10–90% RH; storage humidity: 5–90% RH
• Dimensions (W×H×D): 49.8 × 203.4 × 195 mm
• Placement: desk or wall

How to use

Place the TENDA 4G08 on a flat surface or mount it on a wall using compatible fixtures. Connect the router to a power source (AC 100–240 V) and insert a compatible 4G SIM card if required by your internet configuration. Use an Ethernet cable to connect wired devices to the LAN ports as needed. Access the router's web‑based management interface from a connected device to complete network setup, configure wireless SSIDs for 2.4 GHz and 5 GHz bands, set security (WPA3 or WPA2), and enable DHCP client or server functions.

Recommendations

Position the router centrally and elevated for best wireless coverage, avoid placing it near large metal objects or other sources of radio interference, and keep firmware updated via the web interface to maintain security and performance.