Transceptor SFP de fibra ótica BlueOptics 100-01792-BO, 1250 Mbit/s, prateado, MTBF 1.000.000 h

BlueOptics 100-01792-BO is an SFP fiber optic transceiver module designed for insertion into SFP slots of switches, routers and fiber network equipment. The module supports a maximum data rate of 1250 Mbit/s and is supplied in a compact silver housing with a lightweight construction (approx. 2 g). Typical deployment scenarios include uplinks and short-range fiber links where a reliable, hot-pluggable SFP interface is required. The product specification includes a Mean Time Between Failures (MTBF) of 1,000,000 hours, indicating long-term operational reliability under normal conditions.

Advantages

The BlueOptics SFP transceiver offers a compact form factor and a standard SFP interface that ensures broad compatibility with networking devices accepting SFP modules. With a maximum throughput of 1250 Mbit/s, the module supports standard fiber link speeds used for many access and distribution layer connections. Its lightweight silver housing and hot-pluggable design simplify installation and exchange without powering down the host device. The specified MTBF value provides an indication of expected long-term durability in continuous operation.

Suitable for

Key specifications

How to use

Insert the BlueOptics SFP transceiver into an available SFP slot of a compatible switch, router or media converter while the host device is powered on or off according to the host manufacturer's instructions. Ensure the fiber cabling and connectors match the transceiver type and that fiber polarity and connector types are correct. After seating the module, connect the appropriate fiber patch cable and verify link status via the host device management interface or status LEDs. For module removal, follow the equipment vendor's hot-swap guidelines to avoid damage to the transceiver or host.

Recommendations

Use this SFP transceiver in environments consistent with the host device's operating temperature and humidity ranges. Avoid bending fiber beyond recommended radii and maintain clean connector endfaces to ensure signal quality. When replacing modules, power-down procedures recommended by the network equipment vendor should be observed if specified.