UPS CYBERPOWER CP2000EIPFCRM2U 2 kVA / 1200 W, 8 tomadas AC, montagem em rack, bateria de chumbo-ácido selada

The CyberPower CP2000EIPFCRM2U is a line-interactive rackmount uninterruptible power supply delivering up to 2 kVA (1200 W) of output power. Designed for installation in equipment racks, this UPS features a metal housing, sealed lead‑acid batteries and eight AC outlets to provide short-term emergency power and basic surge protection for servers, network devices and other critical equipment. A single USB 2.0 port enables simple monitoring or connection to management tools. Measured runtime is approximately 1.3 minutes at full load and about 7.9 minutes at half load, making it suitable for graceful shutdowns or temporary continuity during short mains interruptions. The unit is CE and RoHS compliant and comes in a black finish.

Advantages

The rackmount design allows the UPS to be integrated into standard server cabinets, saving floor space and keeping power protection close to the protected devices. Line-interactive topology offers voltage regulation and battery backup without the complexity of double-conversion systems, balancing efficiency and protection. Sealed lead‑acid batteries provide reliable, maintenance-free backup power and the metal enclosure enhances durability in server-room environments. Eight AC outlets accommodate multiple devices and the USB 2.0 port supports basic monitoring and orderly shutdown where supported by management software.

Suitable for

• Rack-mounted servers and network switches
• Small data closets or network cabinets
• Storage devices, NAS units and backup controllers
• Point-of-sale and critical single-cabinet installations

Key specifications

• Output power capacity: 2 kVA (1200 W)
• AC outlets: 8
• Battery type: sealed lead‑acid
• USB: 1 × USB 2.0 port
• Form factor: rackmount (designed for cabinet installation)
• Measured backup time: ≈1.3 min at full load, ≈7.9 min at half load
• Enclosure: metal, colour: black
• Weight: 12.96 kg

How to use

Install the UPS into a compatible rack following the rackmount kit instructions, ensuring adequate ventilation and secure mounting. Connect the UPS to a dedicated AC supply and allow the internal batteries to charge before relying on battery backup. Plug equipment into the rear AC outlets according to priority, placing the most critical devices on the UPS-protected outlets. If monitoring or automated shutdown is required, connect the USB 2.0 port to a management host and install any compatible power management software. Test the configuration by performing a controlled power interruption to confirm orderly shutdown procedures and verify runtime meets operational needs.

Recommendations

Place the UPS in a temperature-controlled environment within manufacturer-recommended limits and avoid stacking heavy equipment on top of the unit. Schedule periodic battery runtime tests and replace sealed lead‑acid batteries according to usage and service-life guidelines to maintain reliable backup capability.