Abridor de porta Yale FF Fafix 19A 6–12V AC/DC, corrente de trabalho 1A

Yale FF Fafix 19A is a compact door opener engineered for 6–12V AC/DC power supplies with a working current of 1A. Designed for mechanical actuation in access control installations, this unit fits residential and light-commercial doors where reliable release and minimal installation footprint are required. The model integrates with intercoms, access panels, and simple control circuits to automate door release while maintaining straightforward wiring and operation.

Advantages

The device offers stable mechanical operation at low voltage levels, providing consistent door release performance with modest power consumption. Its compact dimensions allow for installation in limited space environments and compatibility with common strike assemblies. Operating on both AC and DC supplies increases installation flexibility, and the defined working current simplifies planning for power and cabling requirements.

Suitable for

• Residential entrance doors with electric strike systems
• Small offices and light-commercial entry points
• Integration with intercoms and access control panels
• Retrofit projects where space is limited

Key specifications

• Operating voltage range: 6–12 V AC/DC
• Typical working current: 1 A
• Mechanical actuation suitable for electric strike operation
• Compact form factor for shallow mounting locations
• Designed for indoor and sheltered mounting on doors or frames

How to use

Connect the door opener to a compatible 6–12V AC or DC power source, observing correct polarity for DC installations. Integrate the unit with the buildings intercom or access panel wiring so that control pulses or sustained signals trigger mechanical release. Mount the device aligned with the strike assembly and ensure moving parts are free of obstruction. Test the opener several times after installation to confirm reliable actuation and adjust alignment if necessary.

Recommendations

For optimal performance, use a power supply capable of delivering stable voltage within the specified range and supporting the 1A working current. Verify compatibility with the existing strike assembly and check wiring connections periodically. Avoid exposure to direct weather conditions unless the mounting location is adequately sheltered.