Extensão de cabo de alimentação InLine, conector de aparelho IEC-C15/IEC-C14 reto, 3 m

The InLine power extension cable IEC-C15 to IEC-C14, 3 m, provides a straight female C14 coupler to male C15 coupler interface designed for equipment with hot-condition inlets. The cable uses an IEC 60320 C15 plug rated for higher temperatures and an IEC 60320 C14 socket in a straight configuration, enabling a safe short extension or repositioning of power connections in IT racks, power distribution units and devices with temperature-sensitive inlets. The 3 m length gives flexibility while keeping connection integrity for professional and industrial environments.

Advantages

This extension cable features an IEC-C15 plug suitable for elevated operating temperatures and a straight IEC-C14 socket for straightforward coupling. The cable construction uses multi-core H05V2V2-F wiring with conductor cross-section appropriate for the stated length, ensuring reliable current delivery. Its black jacket and standard connector geometry make it compatible with a wide range of IT and power equipment while simplifying replacement or rerouting of existing power leads.

Suitable for

• Connecting devices with a C15 (hot-condition) inlet to existing C14 power outputs
• Extending or repositioning power connections in server racks and power distribution units
• Temporary or permanent setups where higher connector temperature rating is required
• Professional and industrial environments requiring standard IEC power connections

Key specifications

• Connector A: IEC 60320 C15 plug (hot-condition, straight)
• Connector B: IEC 60320 C14 socket (straight)
• Cable length: 3 m
• Cable type: multi-core H05V2V2-F
• Conductor cross-section: configured for 3 m length per manufacturer guidance
• Colour: black

How to use

Inspect both mating connectors and ensure power is switched off before connecting the cable. Insert the IEC-C14 socket into the equipment or power source with the matching C14 plug, and connect the IEC-C15 plug to the device with the C15 inlet. Verify secure, fully seated connections and restore power. Avoid bending the cable sharply near the connectors and route the cable to prevent mechanical strain or contact with sharp edges.

Recommendations

Use this extension where the device inlet specifies a C15 (hot-condition) connector; avoid using it in applications exceeding the connector's temperature or current ratings. For permanent installations, check local electrical regulations and verify that the conductor cross-section and cable type match the required load and environment.