Lixadeira de cinta pneumática AWTOOLS 10x330 mm AW10325

Grinding, deburring, and finishing metal or wood surfaces by hand is slow, inconsistent, and physically draining. The AWTOOLS AW10325 pneumatic belt sander replaces manual effort with a compact, high-speed tool that delivers uniform results on flat and curved workpieces alike. Its 10x330 mm belt reaches into tight corners and along edges where larger sanders cannot go, while the 16,000 RPM no-load speed removes material quickly without overheating the surface. Powered entirely by compressed air, it runs cool and requires no electrical connection, making it safe for use in damp or solvent-rich environments.

Who is it for

This sander is built for professional workshops, automotive body repair, metal fabrication, and maintenance teams that already have a compressed air line. It suits technicians who need a lightweight, manoeuvrable tool for weld seam dressing, rust removal, paint preparation, and deburring of machined parts. Hobbyists with a suitable compressor will also appreciate its precision and low vibration.

Main features

• Pneumatic drive: operates at 6.3 bar (90 PSI) with air consumption of 170 l/min (6 CFM).
• High speed: 16,000 RPM no-load speed for fast stock removal and smooth finishing.
• Compact belt size: 10 x 330 mm belt reaches narrow spaces and contours.
• Quick-release belt change: tool-free replacement keeps workflow uninterrupted.
• Aluminum alloy housing: durable yet lightweight for extended use.
• Rear exhaust: directs air away from the workpiece and operator.
• Trigger safety lock: prevents accidental start-up.
• Low vibration: less than 2.5 m/s² reduces fatigue during long jobs.
• Included accessories: 2 sanding belts and 1 air connector.

Specifications

• Belt size: 10 x 330 mm
• Operating pressure: 6.3 bar (90 PSI)
• Air consumption: 170 l/min (6 CFM)
• No-load speed: 16,000 RPM
• Air inlet size: 1/4" NPT
• Recommended hose diameter: 3/8"
• Exhaust direction: rear
• Sound pressure level: 80 dB(A)
• Vibration level: <2.5 m/s²
• Power source: pneumatic (compressed air)
• Housing material: aluminum alloy
• Belt change mechanism: quick-release
• Safety feature: trigger safety lock
• Application: sanding, grinding, deburring
• Included accessories: 2x sanding belts, 1x air connector

Tips

Always set the compressor regulator to 6.3 bar and use a 3/8" hose to maintain full speed and torque. Lubricate the air inlet with a few drops of pneumatic tool oil before each session to extend motor life. When changing belts, disconnect the air supply first and ensure the belt is centred on the rollers. For best results on metal, start with a coarse grit and finish with a fine belt, moving the sander in the direction of the grain.