Conta Contactos
O seu carrinho
Envio por DPD e FedEx
Precisa de ajuda? Pergunte à IA

Serra copo individual Cimco 207476

Serra copo individual Cimco 207476
Serra copo individual Cimco 207476
98,27 €
PDF
PDF
Stock EsgotadoSem stock Código 2203369 Modelo 207475 Garantia 3 anos

Envios e devoluções

Faça uma pergunta – o assistente IA responde de imediato.

Descrição

The Cimco 207476 hole saw is a single-piece cutting tool with a 7.5 cm diameter designed for creating precise circular holes in a range of construction and workshop materials. Intended for use with compatible drill arbors, this hole saw offers a balance of cutting performance and durability for routine and professional drilling operations. Its geometry and material selection enable cutting through cast iron, copper, non-ferrous metals, stainless steel, steel and wood when used with appropriate speeds and cooling.

Advantages

The hole saw provides a stable, concentric cut with reduced wobble thanks to its single-piece construction. It is engineered to maintain cutting edges under moderate loads and to resist deformation during repetitive use. The 7.5 cm diameter is suitable for many common hole sizes, and the tool’s compatibility with a variety of metals and wood reduces the need for multiple specialty saws. The design facilitates chip evacuation and improves cutting efficiency when combined with correct drilling technique.

Suitable for

Key specifications

How to use

Secure the hole saw to a compatible arbor and tighten according to the arbor manufacturer’s instructions. Mark the hole position on the workpiece and, if possible, start with a pilot hole or center punch to prevent walking. Select drill speed appropriate to the material: lower speeds for harder metals, higher speeds for wood and soft metals. Apply steady, even pressure and allow the tool to cut without forcing; lift periodically to clear chips and, for metals, use cutting fluid or coolant to reduce heat buildup. After finishing the cut, remove burrs and inspect the hole for accuracy.

Recommendations

Use appropriate personal protective equipment (eye protection, gloves) and clamp the workpiece securely. Match drill speed and feed pressure to the material being cut, and use cutting fluid on ferrous and stainless steels to extend tool life. Replace the arbor or pilot bit if worn to maintain concentricity and hole quality.

Destaques principais
  • Drilling circular openings for pipes and conduits in metal and wood panels
  • Creating access holes for electrical fittings and junction boxes
  • Cutting openings for fixtures, vents and hardware installations
  • Workshop and maintenance tasks requiring repeatable, uniform holes
  • Cutting diameter: 75 mm
  • Construction: single-piece hole saw
  • Suitable materials: cast iron, copper, non-ferrous metals, stainless steel, steel, wood
  • Typical mounting: used with compatible drill arbor or mandrel (sold separately)
  • Intended use: manual or machine drilling with appropriate drill speeds

Especificações

Especificações
Adequado para
Berbequim
Cor do produto
Red
Diâmetro
75 mm
Materiais compatíveis
Ferro fundido, Cobre, Metal não ferroso, Aço inoxidável, Aço, Madeira
Material
Aço rápido (HSS)
Material dos dentes
Aço rápido (HSS)
Número de peças
1 pc(s)
Número de serras-copo
1 pc(s)
Peso
0.25 kg
Profundidade de corte (máx.)
50 mm
Tipo
Individual
Histórico de preços nos últimos 6 meses
Serra copo individual Cimco 207476
Atual
98,27 €
Mais baixo 7 d
98,27 €
Mais alto 7 d
98,27 €
Variação 24 h
+1,93 €   +2%
Variação 7 d
+1,90 €   +2%
Variação 30 d
0,00 €   0%

Escrever uma avaliação

Classificação *
O seu nome será apresentado publicamente – pode utilizar um pseudónimo. Convidamos os compradores a escrever avaliações; verificamo-las antes da publicação e publicamos também as avaliações críticas.

Mais produtos CIMCO nesta categoria

11

Produtos populares nesta categoria

2
Vendedor: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vílnius, Lituânia · Código da empresa 303192950 · NIF/IVA UE LT100008198612 · Envio a partir da UE (Lituânia)
WhatsApp
Messenger
Olá, sou o assistente de IA da DistriNode. Posso ajudá-lo a encontrar produtos, comparar opções, criar orçamentos em PDF ou abrir pedidos de suporte.
Todas as categorias