Conta Contactos
O seu carrinho
Envio por DPD e FedEx
Precisa de ajuda? Pergunte à IA

Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm

Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
75,63 €
The BlueOptics TRPEG1EEXC000E2G-BO is an SFP transceiver module for single‑mode fiber networks. It supports a maximum data transfer rate of 1250 Mbit/s and operates at a wavelength of 1310 nm. Housed in a durable metal casing and weighing approximately 20 g, the module requires a 3.3 V supply and is... Ler mais
Stock 22 Código 1485840 Marca BLUEOPTICS Modelo TRPEG1EEXC000E2G-BO Garantia 2 anos

Envios e devoluções

Entrega prevista Sexta-feira, Outubro 23
Receberá atualizações através do nosso sistema de seguimento detalhado
Opções de pagamento
Cartão bancárioVisaMastercardPayPalApple PayGoogle PayTransferência bancária

The BlueOptics TRPEG1EEXC000E2G-BO is an SFP transceiver module for single‑mode fiber networks. It supports a maximum data transfer rate of 1250 Mbit/s and operates at a wavelength of 1310 nm. Housed in a durable metal casing and weighing approximately 20 g, the module requires a 3.3 V supply and is designed to fit standard SFP ports using an LC duplex optical interface. The transceiver supports link reach up to 40,000 m over appropriate single‑mode fiber.

Advantages

The module follows MSA‑compatible SFP form‑factor standards to ensure mechanical and electrical interoperability with compatible network equipment. A compact metal enclosure provides mechanical protection and thermal stability. With support for 1310 nm optical transmission and a rated maximum distance of 40 km, the transceiver is suitable for long‑reach Ethernet and related optical protocols. Low weight and a standard 3.3 V interface simplify installation and replacement in switches, routers and media converters.

Suitable for

Key specifications

How to use

Power down or follow hot‑swap procedures recommended by your hardware vendor before inserting the SFP module into an SFP cage. Insert the transceiver into an empty SFP slot until it latches, then connect LC duplex patch cords to the transmit and receive ports, observing correct fiber polarity. Configure the host device for the intended optical link speed and protocol (up to 1250 Mbit/s) and verify link status through the device management interface. If the host supports digital diagnostic monitoring (DDM/DOM), enable or query the DDM functions to read real‑time parameters where available.

Recommendations

Use single‑mode LC duplex fiber and compatible patch cords for best range and signal quality. Verify compatibility with the target switch or router model and ensure the host firmware accepts third‑party SFP modules if required. Keep optical connectors clean and capped when not in use; follow ESD precautions when handling the transceiver.

Destaques principais
  • Single‑mode fiber links up to 40 km (1000BASE‑LH style applications)
  • Gigabit Ethernet and other 1.25 Gbit/s optical interfaces
  • Installation in switches, routers, media converters and compatible SFP slots
  • Point‑to‑point backbone connections and campus interconnects
  • Maximum data rate: 1250 Mbit/s
  • Wavelength: 1310 nm
  • Maximum transfer distance: 40,000 m (40 km) over single‑mode fiber
  • Optical connector type: LC duplex (SFP form factor)
  • Supply voltage: 3.3 V
  • Product colour / finish: silver metal housing
  • Weight: approx. 0.02 kg
Especificações
Comprimento de onda
1310 nm
Comprimento de onda Rx (máx.)
1310 nm
Comprimento de onda Tx (máx.)
1310 nm
Conector de fibra ótica
SFP
Cor do produto
Silver
Distância máxima de transmissão
40000 m
Material da carcaça
Metal
Norma do transceiver SFP
LH
Número de produtos incluídos
1 pc(s)
Peso
0.02 kg
Peso da embalagem
30 g
Sistema duplex
Full
Taxa máxima de transferência de dados
1250 Mbit/s
Tecnologia de cablagem Ethernet de fibra
1000BASE
Temperatura de armazenamento (T-T)
0 - 90
Temperatura de funcionamento (T-T)
0 - 70
Temperatura máxima de funcionamento
70 °C
Tensão de entrada
3.3
Tipo de interface
SFP
Tipo de transceiver SFP
Fiber optic
Histórico de preços nos últimos 6 meses
Transceptor SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Atual
75,63 €
Mais baixo
73,33 €
Mais alto
78,42 €
Variação 24 h
+0,56 €   +1%
Semana
+0,72 €   +1%
Mês
+0,20 €   +0%

Produtos populares nesta categoria

Olá, sou o assistente de IA da DistriNode. Posso ajudá-lo a encontrar produtos, comparar opções, criar orçamentos em PDF ou abrir pedidos de suporte.