Comutador DiSEqC multiswitch de satélite Megasat 4-1 Pro

The Megasat DiSEqC Switch 4-1 Pro enables switching of up to four satellite LNBs to a single satellite receiver. The device operates across the satellite IF frequency band and is housed in a weatherproof enclosure suitable for outdoor installation. No external power supply is required for operation.

Advantages

The switch supports DiSEqC control from the receiver for automatic selection between up to four satellite inputs. Its integrated weatherproof housing allows safe outdoor mounting, and the compact dimensions make it easy to install in confined spaces. The unit covers the standard satellite frequency range and works without an additional power source.

Suitable for

Key specifications

How to use

Connect up to four satellite LNB cables to the input ports of the DiSEqC 4/1 switch and run the switch output to the satellite receiver's LNB input. Configure the receiver to control the desired satellite via DiSEqC commands (select input 1–4 as appropriate). Mount the unit outdoors if needed using the weatherproof housing, ensuring connections are tight and protected from severe mechanical strain.

Recommendations

Use coaxial cables in good condition and correctly tightened F-type connectors to minimise signal loss. Configure receiver DiSEqC settings after installation and test each satellite input individually to verify proper switching and signal levels.