SSD Interno M.2 NVMe GIGABYTE AORUS Gen4 7000E 1 TB — 7100 MB/s leitura, 6100 MB/s escrita, M.2 2280

Level up your gaming experience
Built with a high-quality controller and 3D TLC NAND flash, AORUS Gen4 7000E SSD delivers up to 7,100MB/s sequential read and 6,100MB/s sequential write performance. By utilizing Host Memory Buffer technology, the SSD controller can access the host DRAM without performance loss. As for features, AORUS Gen4 7000E SSD supports TRIM, SMART, and Over-Provision technologies to improve the reliability and durability of SSDs. AORUS Gen4 7000E SSD allows users to enjoy a smoother and faster gaming experience with more power efficiency.

NAND Flash Selected for High Performance
Selected High Speed 3D TLC NAND Flash (2400+ MT/s)
The ultra high speed - 2400+ MT/s throughput - 3D TLC NAND, are selected by critical criteria, combined with the AORUS Gen4 7000E SSD's firmware optimizations, lead to superior performance.

Improve efficiency & responsiveness
Equipped with a robust combination of controller and new generation 3D TLC NAND, AORUS Gen4 7000E SSD delivers blazing speeds: up to 7,100 MB/s for sequential read,and up to 6,100MB/s sequential write. Sequential Read performance of PCle 4.0 SSDs is up to 50% faster than PCle 3.0 SSDs. AORUS Gen4 7000E SSD puts you in thecomputing fast lane.

Host Memory Buffer (HMB)
The Host Memory Buffer (HMB) feature utilizes the DMA (Direct Memory Access) of PCI Express to allow SSDs to use some of the DRAM on PC system, instead of requiring the SSD to bring its own DRAM.

Power Saving While Operating
AORUS Gen4 7000E SSD leverages a controller which produces lower power consumption for all the high-performance computing needs. Compared with regular PCIe 4.0 x4 SSD, AORUS Gen4 7000E SSD reduces about 30% power while operating. The power consumption of AORUS Gen4 7000E SSD is notably improved.

GIGABYTE CONTROL CENTER (GCC)
GIGABYTE CONTROL CENTER (GCC) is a unified software for all GIGABYTE supported products. It provides newly designed intuitive user interface to control all essential function.
- Unified software platform for all Gigabyte supported products
- Intuitive user interface for an eased experience
- Modularized control components only for installed hardware
- Auto update function to keep system up to date and support future products

SSD Tool Box
The newly updated SSD Tool Box is a software that gives users an overview of the SSD Status and various aspects such as model name, FW version, health condition and sensor temperature. Moreover, users can clear all the data with the Secure Erase function. You can download the SSD Tool Box from the link.

GIGABYTE AORUS Gen4 7000E. SSD capacity: 1 TB, SSD form factor: M.2, Read speed: 7100 MB/s, Write speed: 6100 MB/s, Component for: PC

How to use

Install the M.2 2280 module into a compatible M.2 PCIe 4.0 x4 slot on the motherboard following the motherboard manufacturer’s installation instructions and secure it with the mounting screw. Ensure the system BIOS/UEFI detects NVMe storage and update the SSD firmware with the GIGABYTE Control Center or SSD Tool Box if recommended. Format the drive or initialize it in the operating system before use and set it as the boot device if you intend to install an operating system.

Recommendations

For best performance, use the SSD in a PCIe 4.0 x4 slot and enable any motherboard settings that optimize NVMe operation. Keep firmware and the GIGABYTE Control Center / SSD Tool Box up to date to monitor drive health, perform secure erase when repurposing the drive, and benefit from any controller or firmware enhancements.